English
Epoxy version of the Hanse 430. Spacious and well equipped sailing yacht, with very good sailing characteristics.
The hull of this Hanse 430 is the optional Epoxy version: lighter, stiffer and moreover with a high osmosis resistance. This generation of Hanse is characterized by comfortable, but very good sailing characteristics with very much ease of use by among others the self-tacking jib and practical deck layout. From the range of Hanse yachts, the Hanse 430 is a beautifully lined and fast design. Just one size more in the 40-foot segment, but nevertheless good and easy to handle for a family or crew of two.
General
Hull shape: Hull made of prepeg fibreglass in epoxy.
Steering system: Jefa Twin Spoke Steering Wheels
Windows: Lewmar, to open windows is construction and lewmar deck hatches
Other: The hull of this Hanse is constructed of prepeg fibreglass in epoxy, vacuum cured with CorecellTM foam. This results in a lighter and stiffer hull than the standard polyester version, with the epoxy laminate also offering high osmosis resistance. The Hanse 430e has a beautifully lined, modern hull shape, which of course offers the good sailing characteristics expected of a Hanse.
The superstructure is sleekly designed, with all halyards from the cockpit nicely concealed below deck. The yacht offers a very spacious, open cockpit with double steering position. This Hanse 430 has an optional stainless steel railing on the stern, to close off the cockpit. In addition, this railing provides two additional, folding seats.
Accommodation
Saloons: Salon with round seat on starboard and navigation table with seat on port side
Cabins: Double aft cabin and spacious owner's cabin with en-suite wet cell in forward cabin
Berths: Additional berth to create on seat card table
Other: The Hanse has a nice and practical and clean designed interior, with three spacious cabins. The navigation corner with sofa can be converted into an extra berth or pilot berth if desired. In the front there is a very nice and spacious owner's cabin, with en-suite wet cell and secretaire with bench. The two aft cabins are also spacious. The spacious saloon offers a round seat, with opposite navgation corner, which is thus practically incorporated into the saloon area, as a cosy seating option. Besides various standard practical solutions and storage spaces, this Hanse 430e is equipped with a number of additional practical items:
- 6x mosquito net flap for ports
- 4x mosquito screen for deck hatches
- Extra inspection hatches in floor panels
- Swingfeder mattress support
- extra Johnson bilge pump in foreship
Engine, electrics, water
Year: New engine installed on warranty in 2009
Propulsion: 3-Blade Varioprop
Water system: Also seawater pump in kitchen
Hot water: Boiler 25 liters on engine and 230V
Shorepower: 2x 15 meter shore power cable
Other: Teflon cover plate for Saildrive
Rig and sails
Winches: Harken self tailing
Genoa: North Sails 115% genoa
Jib: North Sails self-tacking jib
Furling foresail: Facnor
Gennaker: North Sails custom made 140 m2 gennaker, with snuffer
Number of masts: Sparcraft Performance mast
Other: - Harken 46 AST genoa winches
- Harken 46 AST halyard winches, of which SB are electric
- Blue Performance winchhandle holders
- Mainsail with third reef to cockpit
- Several extra blocks and stoppers
- Dyneema mainsail halyard
- Facnor built-in turn buckle to adjust forestay tension
-
Equipment
Anchor windlass: Controls on foredeck and in cockpit. Chain counter defective
Fenders, lines: mooring lines and fender set, with two dolphins
Swimming ladder: extension for stainless steel swim ladder
Other: - Teak in cockpit
- Teak on upper deck
- Stainless steel bow plate and reinforced anchor roller
- Aft railing with two folding steering seats
- Gangway with pin-connection on aft and foredeck
- LED navigation lights
Safety
Other:
Preliminary specification subject to client approval.