English
Mudcat MC915 Auger Dredge
Construction material – Steel
•Length : 38’ 11″
•Width : 9′ 0″
•Height : O.A.8’8′
•Weight : 21,000 lbs. & Dry
•Draft : 21″
•Floating Clearance : 6’9″
•Fuel Capacity : 360 gallons
•Pontoons : Two 36″ x 32″ x 330″
10 Gauge H.R. Steel with Internal Bulkheads and Stiffeners; formed for rigidity; polyurethane foam filled
•Auger: Diameter 13-5/8″
•Pitch : 11″
•Flighting: 3/8″
•Speed: Up to 100 RPM
•Cutter Knives: 45 Detachable Heat-Treated Blades
•Cutter Bars: 36 Detachable Heat-Treated Blades
•Auger Torque; 16,500 in. lbs. Rotates to Cut Slope up to 45 degrees
•19″ x 9′ Hydraulically Adjustable Cut 9′ wide x 18″ maximum depth
•Operating: Depth-15′ maximum
•Detroit Diesel: 6-71 RC, 228 BHP @ 2100 RPM
•Clutch—Manual: 14″ Dia. Disc & Pressure Plate
•Reduction—Gear : Ratio 1.8/1—Drive Coupling Flex Type
•Centrifugal Closed Impeller
•Impeller Diameter: 19-1/2″
•Suction Diameter: 8″
•Discharge Diameter: 8″
•Shaft Diameter: 2-7/8″
•Capacity: 2000 GPM @ 1160 RPM against 180′ Head
•Material Removal: To 120 Cu. yds./hr.
•Capacity: 75 GPM @ 2800 RPM
•Pressure: 80 PSI
Dual Pumps
•Capacity Total: 30.5 GPM @ 1800 RPM
•Reservoir : 47 Gallon
•Circuit One: Auger Drive
•Circuit Two: Boom, Mud Shield and Winch
Relief Valve Setting:
•Auger : 3000 PSI
•Others: 1500 PSI
Treble Sheave Hydraulic Winch
•Traverse Speed: 50 FPM Maximum Forward & Reverse
•Average Cutting Speed: 8 to 12 FPM
•Voltage: 12V
•Alt. Output: 65 Ampere
•Batteries: 12V, 205 Ampere Hour, Parallel Wired
•Circuits: 2 Wire System Full Ground
Polyurethane finish coat on corrosion inhibitive epoxy primer
•Standard Colors: Green and White
Located in Ontario, Canada