English
Recently Donated! Offered on an attractive lease to own program.
Victory is hull number two of the three Cape Dory 45's ever built.
Carl Alberg's grandest achievement, the Cape Dory 45 is built to the highest quality and is a go-anywhere yacht.
Victory has been stored indoors and is in excellent condition.
Builder's Comments
"The Cape Dory 45 is a remarkable yacht built by craftsmen dedicated to quality and reliability. Each detail has been carefully designed from a flared, tapered toe rail with custom polished bronze chocks, to the independently stayed ketch rig, to the extensive chase tube routing system below the cabin sole.
This boat truly carries the distinction of being "yacht finished" in all regards with uncompromised standards and attention to detail throughout.
It is not only the polished hardware, the hand-rubbed varnished teak finish below or the luxuriously upholstered cushions which make the Cape Dory 45 the exceptional yacht that it is, but in total the many small, significant design and construction features which set it apart from the rest of the fleet."
Accommodations
The Cape Dory 45 interior is an expert iteration of Carl Alberg's classic, functional designs.
The interior is large for a 45 footer with 6' 8" headroom and a general feeling of space throughout.
The forward cabin is spacious with 6' 3" V-berth, drawers, counter top, hanging locker, shelves. There is a private door to the forward head.
Aft to port is the forward head with teak grated sole draining to a shower sump. One door to forward cabin, one door to main saloon.
Across from the head to starboard is a hanging locker, counter top and bank of drawers.
Continuing aft is the main saloon with generous L settee to port and straight settee to starboard with pilot berth above and outboard.
There is a gorgeous drop leaf table on centerline which allows seating for 6+. Bottle storage inside the table accessible from two top-opening lockers.
There are bookshelves and storage lockers above the port settee and storage pockets behind port and starboard settee backs. There is a large storage / hanging locker aft to port and a TV mounted above.
Aft to starboard is the full sized nav station. The flip top nav desk provides storage for charts, ships papers, etc. Nav / Comm equipment is mounted outboard and above.
Continuing aft, the large U shaped galley is to starboard at the base of the companionway stairs. Centerline double stainless steel sinks, chopping block, three burner propane stove with oven, deep insulated refrig / freezer box, microwave oven.
There is engine access behind the removable companionway stairs and lift off counter / cover.
To port of the companionway stairs is the aft stateroom with a generous 6' 10" double berth, changing settee, counter, drawers, locker, shelves and hanging locker. There is engine access along the inboard partition.
The aft head is the larger of the two heads with sink, vanity, toilet and a full sized separate shower stall.
The sellers' personal gear is excluded from the sale.
Mechanical
4-cylinder Perkins 4-154 (55 hp) engine with 2,455 hours
Cockpit engine control and gauge panel
Nilsson V-3000 vertical electric windlass
Vented Propane storage locker (fits two full sized bottles) with regulator and solenoid
Stainless steel hot water heater (engine heat exchanger and electric)
Electric and Manual bilge pumps
Electrical / Electronics
120 volt, 30 Amp shore power with 2x shore cords
Updated Mastervolt Dakar Combi 12 / 2500-100
House and Engine Start Battery banks with parallel switch
B&G Depth, Speed, Apparent Wind and Wind Speed instruments in cockpit
VHF mounted in stbd laz for helm access
Robtertson Autopilot with wired remote at helm and control head at nav station
Ratheon Radar at nav station
Sitex Ultima VHF at nav station
Magnavox MX100 GPS Navigator at nav station
Northstar 941X GPS / Plotter
B&G Hecta 4 Depth at nav
B&G Hecta 4 Sailing instruments at nav
Furuno SSB
Sails and Rigging
Cutter / Ketch rig
Keel stepped main mast
Deck stepped mizzen (cockpit sole)
Harken roller furling genoa / yankee
Harken Roller furler staysail
Roller furling main
Roller furling mizzen
Wire standing rigging
Hull and Deck
Hull is laminated with 1/2" airex foam core between laminates of bi-directional combination rovings and polyester resin
Deck is laid up with glass strands and woven roving with klegicell core for stiffness and insulation. Hardware / equipment areas are solid glass / wood / aluminum
The deck sits on the inward turning hull flange and is through-bolted under the toe rail
Internal 2-piece lead ballast is encapsulated in the keel in resin
Long keel with attached rudder
3-bladed bronze fixed prop in aperture
Bow sprit / anchor roller
Stern boarding / swim ladder
4 opening overhead deck hatches
10 bronze opening portlights
Bow pulpit and stern pushpit
Stanchions and double stainless steel lifeline
30" diameter wheel on Merriman pedestal and steering gear
Exclusions
Personal items, artwork, tools, loose general items seen onboard or in photos and not specifically listed are solely at the discretion of the Seller.
Default Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.