Sadler Phoenix 27 Zu verkaufen (1988) in Conwy Marina, Vereinigtes Königreich

£10.995 GBP
Steuer Bezahlt/enthaltenFinance this boat

KI-generierte Zusammenfassung

Die Sadler Phoenix 27, die in Conwy Marina im Vereinigten Königreich liegt, ist ein 8,30 Meter langer Cruiser, der von David Sadler entworfen und aus dem Rumpf der Sadler Frigate 27 gebaut wurde und über 7 Zoll tiefere Decks für mehr Kopffreiheit verfügt. Das 1988 von Island Plastics hergestellte Schiff lief ein Jahrzehnt später, im Jahr 1998, vom Stapel und wurde mit einem Yanmar 2GM20 18 PS starken Innenborddieselmotor ausgestattet. Ausgestattet mit einer umfassenden Palette an Funktionen für Kreuzfahrten, darunter Autohelm und DSC-UKW-Radio, ist es gut für Langstreckenreisen geeignet. Mit einem über Deck laufenden Slup-Rigg mit einem Saling am Masttopp und Segeln in ausgezeichnetem Zustand bietet der Cruiser eine praktische Ausstattung für das Segeln allein oder mit kleiner Besatzung. Das Boot verfügt über einen durchdachten Innenraum mit 4 Kojen, eine Kombüse mit modernen Annehmlichkeiten und eine kürzlich erneuerte Polsterung, die für Komfort sorgt. Zu den weiteren Merkmalen gehören ein robustes elektrisches System, zahlreiche Navigationstools, Sicherheitsausrüstung und neue Segeltucherweiterungen wie eine Sprayhood und Dodger.

Über diesen Bereich Sadler Phoenix 27

Allgemeine Angaben
Fabrikat/Modell
Sadler Phoenix 27
Preis
£10.995 GBPFinance this boat
Steuer-/Mehrwertsteuerstatus
Bezahlt/enthalten
Kategorie
Used boot für verkauf
Bootsname
Phoenix
Jahr
1988
Designer
David Sadler
Standort
Conwy Marina, Vereinigtes Königreich

Marketing Description

'Phoenix'. a Sadler Phoenix 27 designed by David Sadler from the mould of the Sadler Frigate 27 but with 7 inch deeper topsides giving more headroom . The hull was built in 1988 by Island Plastics and then dry stored until the boat was completed by a boat builder and launched in 1998. The engine was fitted in 1998 and the boat was not used until then.  She is well equipped for cruising with autohelm and DSC VHF radio. All her lines lead to the cockpit for ease of single or short-handed sailing. All In all, she is a well-equipped cruiser which is capable of long distance cruising. Lying Conwy Marina, North Wales


Mechanical

Yanmar 2GM20 18hp inboard diesel engine, conventional shaft drive to a 3-bladed propeller.
Engine installed during fitout in 1998. 
Wheel steering with Vetus hydraulic steering ram
Regular servicing to engine.


Electrical

2 x 12v Batteries (70ah & 88ah)
12v sockets
12v lighting
240v Shore power with Victron Blue Smart 12v 20w 3-output battery charger
Engine alternator
240v 3-pin double sockets

Water: 
Pumped cold water supply 


Rigging

Deck stepped single spreader masthead sloop
KEMP Aluminium mast and boom
Stainless steel standing rigging to include inner forestay - Replaced 2022
Running rigging - Replaced 2022
Slab reefed mainsail
Twin grove forestay with Pro-Furl C290 furling genoa drum
Spinnaker pole
Spinnaker deck gear
Lewmar deck clutches
All lines led aft

Sails:
Fully battened mainsail - Hood - Excellent condition
Genoa with sacrificial UV strip - Hood - Excellent condition
Jib - Hood - Excellent condition
Cruising Chute - Mouse Sails - Excellent condition
Storm jib

Winches:
2 x Lewmar 16 halyard winches
2 x Lewmar 40 self tailing genoa winches


Navigation

Cockpit:
Plastimo 105 Compass on the binnacle
Autohelm 4000 Wheelpilot autopilot 
Stowe Wind Speed and Direction - above companionway hatch (Anemometer mot working - possible loose wire. There is a spare included)
Stowe Speed - above companionway hatch
Stowe Depth with anchor watch alarm - above companionway hatch

Below deck:
Autohelm 4000 control unit
Stowe Navigator 2 Depth and Wind repeater
Stowe hourmeter 
Cobra Marine GPS DSC VHF radio c/w fixed antenna
Clock and Barometer

Navigation lights to include: bow, stern, deck and steaming, masthead


Deck

Anchor, chain, and warp
Seahorse manual windlass
Fenders
Mooring warps
Cleats
Teak laid cockpit seating
Teak cockpit capping
Non-slip deck
Cockpit cushions
Yacht legs
Auxiliary outboard bracket on pushpit


Safety

Bilge pump
Rescue sling
Horseshoe buoy
Echomax radar reflector (mast mounted) - New 2022


Canvas

Sprayhood with grab handle - New 2023
Mainsail cover/stack pack with lazy jacks - New 2023
Dodgers - New 2023


Accommodation

4 Berths in 2 cabins

Below there is 6ft 1ins of headroom and easy movement throughout the boat. The upholstery is very recent and in good condition. There is a pilot berth to port which is wide and comfortable. An infill to the saloon seating to starboard creates another wide single berth. A double is in the forecabin. There is hanging storage adjacent to the forecabin and opposite is the heads compartment with Blakes Lavac sea toilet.

Headlining and wood cabinets are all in good order.

The galley has a twin stainless steel sink with single manual tap.  There is a Vanessa cooker with two burners, oven and grill. A cool box is on the starboard side of the companionway.

JVC stereo with speakers


Construction

Sadler Phoenix 27, Hull and superstructure built by Island Plastics in 1988 for Sadler Yachts to a design by David Sadler. Final fitout by professional boat builder completed in 1998.
GRP hull, deck, and superstructure
Shoal Fin keel with skeg hung rudder
Wheel steering


Disclaimer

For a full, detailed specification with additional photographs and direct contact details for the listing office visit our website

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Unless otherwise stated on the specification sheet the following presumptions are made
- Sail drive and shaft seals are more than 5 years of age
- Fuel and gas hoses and regulators are over 5 years old
- Standing rigging and sails are more than 10 years old

Please note that as the broker/agent, we cannot guarantee or warrant the serviceability of any safety equipment included within the inventory, including but not limited to the condition, operation, or service dates of such equipment. It is the responsibility of the buyer to thoroughly inspect and assess the condition of all safety equipment prior to purchase.


NOTE - Please ring our offices prior to visiting, as the boat may be unavailable for viewing or located at a different marina.

Mehr lesen

Konstruktion
Rumpf
fibreglassGrp monohull
Kiel
Flossenkiel
Messungen
Gesamtlänge
8,30 meter
Länge auf Höhe der Wasserlinie
7,32 meter
Schiffsbreite
2,77 meter
Tiefgang
1,17 meter
Wasserverdrängung
4.250 kg
Antrieb
Motor
1 x Yanmar 2GM20
Motorbetriebsstunden
2649
Kraftstoff
Diesel
Kraftstoffkapazität
55 liter
Höchstgeschwindigkeit
9 kilometer pro stunde
Reisegeschwindigkeit
8 kilometer pro stunde
Unterkunft
Anzahl der Kabinen
2
Anzahl der Liegeplätze
4
Dieser Sadler Phoenix 27 wurde 813 Mal angesehen
Händler Informationen

boatpoint - Conwy Marina Office

Conwy Marina (North Wales), Conwy
Conwy
North Wales
LL32 8GU
United Kingdom
Erwähnen Sie, dass Sie dieses Boot auf TheYachtMarket gefunden haben.
Call seller

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

ABYA Logo
ABYA YACHTHÄNDLER

Maßstäbe setzen In der Yachtvermittlung und -förderung seit 1912

Finde mehr heraus

Vielen Dank

Ihre Nachricht wurde gesendet.

Dieses Boot melden

Weitere Fotos anfordern

E-Mail an einen Freund/eine Freundin senden

Durch Abschicken dieses Formulars stimmen Sie unserer Datenschutz- und Cookie-Richtlinie zu

Durch Abschicken dieses Formulars stimmen Sie unserer Datenschutz- und Cookie-Richtlinie zuDiese Seite wird geschützt durch Google reCAPTCHA.
Es gelten die zugehörige(n) Datenschutzrichtlinie und Nutzungsbedingungen

Dieses Boot melden

Ihre Nachricht wurde erfolgreich gesendet

Warum nicht Interesse an diesen ähnlichen Booten bekunden?

Wir senden folgende Daten an die Verkäufer der ausgewählten Boote: Ihren Namen, Ihre E-Mail-Adresse, Ihre Telefonnummer (falls angegeben), Ihr Land und an welchem Boot bzw. welchen Booten Sie interessiert sind.

Weitere Informationen anfordern

Maßeinheiten ändern

Für diese Funktion müssen Cookies in Ihrem Browser aktiviert sein.

Preis anzeigen in:

Länge, Breite und Tiefgang anzeigen in:

Wasserverdrängung oder Gewicht anzeigen in:

Kapazität oder Volumen zeigen in:

Geschwindigkeit anzeigen in:

Reichweite anzeigen in: