Twin Screw Motor Sailor by John Bain Zu verkaufen (1978) in Bangor, Ards and North Down, Vereinigtes Königreich

£61.950 GBP
Steuer Bezahlt/enthaltenFinance this boat

KI-generierte Zusammenfassung

Dieser Motorsegler mit zwei Schrauben ist eine Sonderanfertigung des angesehenen Schiffsarchitekten John Bain von Silvers und wurde auf Guernsey gebaut. Dieses 10,9 Meter lange Schiff, bekannt als Insouciance (ehemals Keltisle IV), bietet mit seiner Slup-Takelung und reichlich Unterbringungsmöglichkeiten für vier Kojen ein sowohl funktionales als auch komfortables Fahrerlebnis. Das 1978 gebaute und 1981 vom Stapel gelassene Schiff verfügt über einen robusten Kraweelrumpf mit Iroko auf Eichenrahmen und Teakdecks, die für zusätzliche Haltbarkeit mit GFK ummantelt sind. Das Boot wird von zwei 50 PS starken Perkins-Dieselmotoren angetrieben und bietet eine Reisegeschwindigkeit von etwa 8 Knoten. Unter dem derzeitigen Eigentümer wurden umfangreiche Überholungsarbeiten durchgeführt, darunter Aktualisierungen an Rumpf, Masten und Motoren. Die praktische Innenausstattung umfasst eine vordere Kabine, ein schiffbares Steuerhaus und eine funktionale Kombüse, die alle auf Komfort und lange Reisen ausgelegt sind. Der Mast wurde kürzlich ersetzt. Das Schiff verfügt über moderne Navigations- und Elektrosysteme mit Geräten wie einem Raymarine-Plotter und einer elektrischen Ankerwinde und ist damit eine zuverlässige Wahl für Segelbegeisterte. Dieser Motorsegler befindet sich derzeit in Nordirland und ist ein gepflegter Klassiker, bereit für neue Abenteuer.

Über diesen Bereich Twin Screw Motor Sailor by John Bain

Allgemeine Angaben
Fabrikat/Modell
Twin Screw Motor Sailor by John Bain
Preis
£61.950 GBPFinance this boat
Steuer-/Mehrwertsteuerstatus
Bezahlt/enthalten
Kategorie
Used boot für verkauf
Bootsname
INSOUCIANCE
Jahr
1978
Standort
Bangor, Ards and North Down, Vereinigtes Königreich

Boat Overview

A custom Twin Screw Motor Sailor designed by the renowned Silvers naval architect John Bain, built in Guernsey. This vessel features an easy-to-manage sloop rig and offers generous and comfortable accommodation for 4 berths.

Full Details:
Description

Insouciance (ex. Keltisle IV) is the last design of the late John Bain, a bespoke motorsailor design for the first owners. Purchased by the current owner 3 years ago, the previous owner had her for approximately 20 years. Currently lying in Northern Ireland. Under the current ownership, extensive refit work has been completed, including hull, spars, and engines.

Dimensions

Length Overall: 35'9" / 10.9m
Length at Waterline: 32'6" / 9.9m
Beam: 11'6" / 3.5m
Max Draft: 5' / 1.52m
Displacement: 14.31 ton / 14,540 kg
Ballast: keel and bilge plates
Official number: 703769
Registered Tonnage: 14 31/100

Construction

Constructed in Guernsey by Thornes Marine, with the keel laid in 1978 and finally finished and launched in 1981. The hull is carvel built with hard chine, made of Iroko on oak frames, and features teak laid decks. The vessel has a full-length keel with integral iron ballast keel, along with a pair of mild steel bilge keels. Hull is sheathed in GRP.  It is fitted with conventional shafts and stern gear, along with a single mild steel plate rudder. The wheelhouse and aft cabin are constructed of teak with teak brightwork.

Engines

Equipped with Twin Perkins 50hp 4108 indirect water-cooled four-cylinder marine diesel engines (1980), located under the wheelhouse sole, along with batteries, water, and fuel tanks. The engines have had very little use, with a cruising speed of about 8 knots. The propulsion system includes shaft drive to 3 bladed fixed propellers and a single rudder.

Tankage

Fuel: 1,000 l
Water: tankage not known
Holding: yes - tankage not known

Accommodation

The internal accommodation features a bosun’s store forward, along with a forward stateroom containing 2 large berths, hanging space, a separate heads, and a washbasin opposite the WC (port side), all original in unique green tiles. Steps lead up to the wheelhouse, which has sliding doors and hatches to both port and starboard aspects. The helm station is located on the port side, fitted with a steering compass, engine instruments, and controls. Aft of the helm is the navigation desk with a full-size angled chart table and chart stowage. Steps lead down to the galley, which includes a starboard settee/berth and a large teak dining table with storage area and hanging lockers. The galley is equipped with a newer fridge with ice box (circa 2015), a 3-ring gas hob, a microwave oven, and a sink, along with drawers, pantry, and crockery lockers with worktop over. The saloon area features a sturdy free-standing rectangular dining table with settees on either side that double as generous single berths. The aft end of the saloon provides access to the aft deck and transom via doors and hatch.

Rig

The vessel has a Bermudian sloop rig with wood spars. The mast is not original, having been replaced by the previous owner fairly recently, but the exact date is not known (circa 2017). The mast and boom have since been removed and revarnished by the current owner. It is fitted with a mast tabernacle, allowing the mast to be lowered relatively easily for bridges/storage. This sloop rig is easy to manage and provides generous and comfortable accommodation for 4 berths.

Sails

Mainsail: unused by current owner
Furling genoa: only lightly used
Sails are not original, having been replaced by the previous owner fairly recently, but the exact date is not known (circa 2017).

Electrical

12v / 240v
Victron 20A battery charger
Phoenix inverter
Francis electric anchor windlass
Bilge pump
Hot and cold pressurized water

Navigation Kit
  • Autopilot - Raytheon Authelm ST3000
  • VHF - Sailor RT2048
  • Radio receiver - Sailor Type 66 T
  • Plotter/GPS - new Raymarine Axiom 7 MFD
  • Navionics+ UK & Ireland
  • AIS - Digital Yacht AIT2000
  • Echosounder
  • Clock and Barometer
  • Clinometer
Inventory
  • Warps and fenders
  • Main and 100 ft of galvanised chain
  • 2nd anchor
  • Fire blanket
  • Fire extinguishers
  • Gas locker on aft coach roof

Mehr lesen

Konstruktion
Hohle Farbe
Messungen
Gesamtlänge
10,90 meter
Länge auf Höhe der Wasserlinie
9,90 meter
Schiffsbreite
3,50 meter
Antrieb
Reisegeschwindigkeit
15 kilometer pro stunde
Motoren
  • Perkins Motor
    • Diesel
    • 50hp
Kraftstofftanks
  • diesel kraftstoff Tank
Unterkunft
Anzahl der Kabinen
3
Dieser Twin Screw Motor Sailor by John Bain wurde 462 Mal angesehen
Händler Informationen

B J Marine Ltd - Belfast Office

Mr. John Harkness
Erwähnen Sie, dass Sie dieses Boot auf TheYachtMarket gefunden haben.
Call seller

Vielen Dank

Ihre Nachricht wurde gesendet.

Dieses Boot melden

Weitere Fotos anfordern

E-Mail an einen Freund/eine Freundin senden

Durch Abschicken dieses Formulars stimmen Sie unserer Datenschutz- und Cookie-Richtlinie zu

Durch Abschicken dieses Formulars stimmen Sie unserer Datenschutz- und Cookie-Richtlinie zuDiese Seite wird geschützt durch Google reCAPTCHA.
Es gelten die zugehörige(n) Datenschutzrichtlinie und Nutzungsbedingungen

Dieses Boot melden

Ihre Nachricht wurde erfolgreich gesendet

Warum nicht Interesse an diesen ähnlichen Booten bekunden?

Wir senden folgende Daten an die Verkäufer der ausgewählten Boote: Ihren Namen, Ihre E-Mail-Adresse, Ihre Telefonnummer (falls angegeben), Ihr Land und an welchem Boot bzw. welchen Booten Sie interessiert sind.

Weitere Informationen anfordern

Maßeinheiten ändern

Für diese Funktion müssen Cookies in Ihrem Browser aktiviert sein.

Preis anzeigen in:

Länge, Breite und Tiefgang anzeigen in:

Wasserverdrängung oder Gewicht anzeigen in:

Kapazität oder Volumen zeigen in:

Geschwindigkeit anzeigen in:

Reichweite anzeigen in: