Grizabella is a fine example of the two cabin, two heads version of a Beneteau Oceanis 393 Clipper. She benefits from being the "Clipper" version with a taller rig and deeper keel enhancing her sailing performance. She has been a one owner boat since new, and has been well loved. Ideal for tall people as she has lots of headroom. A viewing is highly recommended and can be arranged by calling our Palma office.
Rig
Sloop
SLOOP RIG
Aluminum mast and spars by Z Spars
Stainless steel standing rigging
Pre-stretched nylon running rigging
Slab reefing with controls lead aft for mainsail
Stack pack and lazy jacks
Roller furling headstay
WINCHES
2 x Harken 48.2 self tailing genoa winches
1 x Harken 32.2 self tailing spinnaker sheet winch
1 x 40.2TCEH self tailing halyard winches - electric
SAILS all from 2006
Dacron mainsail by Elvstrom
Dacron genoa by Elvstrom
Cruising chute -Code 0
NAVIGATION EQUIPMENT
Plastimo Olympic 135 steering compass
Icom M421 GMDSS VHF
Furuno Navtex
Navionics XLS - 32G
Raymarine ST6001+ LS40 autopilot
Raymarine ST60 speed/ log/ wind instruments
Raymarine GPS
Raymarine C80 multifunction display
GROUND TACKLE
Bow mounted 16kg Danfoss anchor with 25m chain and 38m warp
Leroy Somer 800W 12V electric windlass
GENERAL EQUIPMENT
Navigation lights
Stainless steel pullpit and pushpit
Guardwires
Swim ladder
SAFETY EQUIPMENT
GTFE automation fire extinguisher in engine room
circular lifebuoy
Radar reflector
Fold flat safety harness points
Gas detector
SINGLE YANMAR 4JH4E 54HP DIESEL ENGINE
Shaft drive to folding 3-blade propeller
Cruising speed under power approx. 6 knots
Max speed under power approx. 8 knots
Morse lever controls
ELECTRICS
2 x service battery
1 x engine battery
Charged by engine alternator and battery charger
Shore power
TANKAGE
Fuel capacity 138 litres
Two Fresh water tanks with capacity of 476 litres each
Holding tank to each head with deck pump out
WATER SYSTEM
Pressurised hot and cold water throughout
Heated by engine calorifier and immersion heater
Transom Shower
BENETEAU OCEANIS CLIPPER 393
Cruising Yacht designed by Berret - Racoupeau and built by Beneteau Yachts in France in 2006.
CONSTRUCTION:
White GRP Hull, Deck and Superstructure
Teak to deck and cockpit
Fin keel
Spade rudder
Wheel Steering
L.O.A. 11.94m( 38' 2" )
L.W.L. 10.70m( 35' 1" )
BEAM 3.97m ( 13' 0" )
DRAFT 1.9m
WEIGHT 7780kg (17,152 lb )