NAJAD Najad 460 para vender (2001) en Naples, Italia

Introduced in 2001, the Najad 460 is a superbly sized cruising yacht. Sold by us to the current owners in 2012, she has enjoyed many years of cruising the Mediterranean with plenty of family on board. She is now in the perfect location for a new owner to continue Mediterranean voyages.

Construction

RCD Status: The yacht conforms with the essential safety requirements of Directive 94/25EC or RCDII (2013/53/EU as appropriate (Recreational Craft Directive) and is categorised A – “Ocean” (or Cat B – whichever is appropriate)

Hull Construction:

• The hull is built in a sandwich construction and hand-laid of multiaxial glass fibre reinforced with ISO polyester.
• The core material is Divinycell high-density PVC foam with sealed cells that do not absorb water.
• The bilge is reinforced with a longitudinal and transverse floor plate construction, which supports keel fittings, mast, engine frame, tanks, and cabin soles.
• Additional reinforcements longitudinal in the hull as stringers.
• All main bulkheads and the transverse chain plate fittings are laminated to the hull.
• Epoxy primer beneath waterline (from new).
• White NGA gelcoat finish with ‘Najad’ Carmine Red gelcoat style lines.
• The hull is top coated internally.

Deck & Superstructure Construction:

• The deck and superstructure are built on the same principles as the hull.
• Teak laid deck with additional teak laid on superstructure forward and aft of cockpit.
• Teak-capped bulwark with stainless steel rubbing strake and additional stainless-steel protection adjacent to mooring cleats.
• Teak laid cockpit seating with solid teak-grate cockpit sole.
• Teak-laid bathing platform steps inset to transom with stainless steel bathing ladder.
• Teak deck recalked (2014).

Keel & Rudder:

• Lead fin keel with acid-resistant stainless-steel bolts.
• Semi-balanced rudder in GRP with 75mm alloyed aluminium rudderpost. Rudder fitting in acid resistant stainless steel, bolted to the skeg.

Machinery

Engine & Gearboxes:

• 1 x Yanmar 4JH 110hp 4-cylinder turbo-charged marine diesel engine (new 2007).
• Yanmar KM4A mechanical reduction gearbox.
• Freshwater cooling via raw-water intake and heat-exchanger.
• Dual Racor fuel filter system (2007).
• Thrust bearing on shaft.

Maintenance & Performance:

• Engine last serviced: Spring 2024.
• Cruising speed – approx. 7.2 to 7.5 knots @ 2,000rpm.
• Maximum speed – 9 knots @ 3,000rpm.
• Fuel consumption at cruising speed – 3.5 litres per hour.
• Range @ cruising speed – 980 Nm.

Propulsion & Steering:

• 3-bladed Flexofold folding propeller.
• Rope-cutter.
• 40mm stainless steel propeller shaft.
• Stern gland with water lubricated rubber bearing and flexible shaft connection.
• Whitlock helm pedestal by with large diameter hide-covered stainless steel helm wheel.
• Rod-linkage steering.
• Emergency steering gear.
• MaxPower 24vDC bowthruster with control at helm.

Electrical Systems

Voltage Systems:

• 24vDC domestic system with 220vAC ring main from shore power.

Battery Banks:

1. 1 x 140Ah 12vDC start batteries (2009).
2. 960Ah 24v Mastervolt AGM service batteries (2023).

Battery Chargers:

• Mastervolt charger with remote panel.
• Mastervolt 24/1500kW Invertor (2013).

Alternators:

• 80Amp 12v alternator for charging start battery bank.
• 75Amp 24v alternator for charging domestic battery bank.

Generator:

• Paguro 3.5kW (2013).

Shore Power:

• 230vAC shore supply.
• Victron STI30 isolation transformer for shore power supply.

Other Electrical:

• 230vAC ring main with sockets throughout interior.
• Main AC/DC control panel with voltmeter.
• 12vDC sockets throughout.
• 24v-12vDC voltage droppers.

Plumbing Systems

Fresh Water & Water Heating System:

• 24vDC pressurised water system with dual pumps (delivering even pressure) for supplying fresh water.
• Hot water supply via engine calorifier and 230vAC immersion heater element in 40 litre hot water tank powered by shore power.
• Accumulator tank.

Bilge Pumps:

• 24vDC electric bilge pump with automatic or manual controls.
• Emergency 12vDC electric bilge pump.
• Whale Gusher 30 manual bilge pump.
• Bilge level alarm.

Grey & Black Water:

• Heads can discharge to holding tanks.
• Macerator pumps for discharging to holding tanks.
• All sinks discharge directly outboard.
• Shower discharges via 24vDC pump.

Tankage

• Analogue water & fuel level gauges.
• Stainless steel deck fillers for fuel tanks, freshwater tanks and holding tanks.

Fuel:

• 490 litres (107 gallons) in three stainless steel fuel tank.

Fresh Water:

• 555 litres (122 gallons) in stainless steel water tanks.

Grey/Blackwater Holding Tanks:

• 2 x 75 litres (16.50 gallons) stainless steel holding tanks.

Navigation Equipment

In cockpit:

• Raymarine Axiom+ 9 Chart plotter at companionway (2022).
• Raymarine Axiom+ 12 Chart plotter at binnacle (2022).
• Raymarine ST60 Multi.
• Raymarine ST60 Speed.
• Raymarine ST60 Depth.
• Raymarine ST7002 Smart Pilot autopilot (2012).
• Garmin binnacle-mounted steering compass.
• Anchor remote control at binnacle.

At chart table:

• Raymarine Axiom+ 9 Chart plotter (2022).
• Raymarine HD digital radar.
• Raymarine RN 300 GPS receiver.
• Raymarine ST60 multi display.
• Raymarine RCU 3 cordless remote-control handset.
• ICS Navtex 6.
• Schatz Clock.
• Schatz Barometer.
• Schatz Thermometer/Hygrometer.
• Echomax active X3 radar reflector.

Communications Equipment:

• Icom 423 at chart table with repeater at binnacle.
• Raymarine AIS 650 (2022).

Domestic Equipment

Galley:

• Force 10 twin burner stainless steel gimballed gas cooker with oven.
• 2 x Coolmatic 24vDC refrigerators with top-opening stainless steel insulated iceboxes.
• Twin stainless steel sinks with thermostatic pressurised water supply.
• Manual fresh water supply to galley via foot pump.
• Gas alarm.

Heads/Showers:

• Jabsco manual marine heads.
• Basins & showers with hot & cold-water supply.
• Thermostatically controlled mixers on showers.
• Hot & cold pressurised freshwater shower at transom.
• Manual saltwater marine heads in forward and aft heads compartments.

Heating & Ventilation:

• Eberspacher diesel-fired hot-air cabin heating with outlets throughout interior.
• Dorade vents for accommodation cabins.
• Opening deckhead hatches with Ocean Air blackout blinds.
• 6 x Caframo 3 Speed fans (2 each in saloon, aft cabin, and forward cabin).

Lighting:

• 24vDC halogen lights inset to deckhead with additional reading lights throughout.
• Night lighting.
• Stainless Ocean Brigast reading lights throughout.
• Cockpit chart lights with 12vDC sockets.
• Deck lighting and under-boom lighting.

Accommodation

Summary of Accommodation:

• Up to six berths in two double cabins plus saloon.
• Interior joinery in African mahogany and satin varnished throughout.
• Varnished teak sole board with holly inlays.
• Blue cloth upholstery throughout.
• Cream vinyl head linings throughout.
• Solid handrails throughout the interior for easy movement offshore.
• Grey Granite Corian-style countertops in galley and heads.

Deck Equipment

Rig:

• Selden aluminium alloy spars.
• Keel-stepped 9/10 fractional-rigged mast with 2-sets of swept-back spreaders.
• Check stays.
• Selden rod-vang adjustable from cockpit – Gas strut replaced 2024.
• Selden in mast furling system led aft to cockpit.
• Carbon Spinnaker pole.
• Harken Mk III genoa furler.
• Hasselfors tensioners on Main and genoa Halyard.
• Lewmar deck gear.
• Schaefer Genoa cars.
• Tracks adjustable from cockpit.
• Removable inner forestay for storm jib.
• Adjustable check stays for use with storm jib.
• Spinnaker equipment.
• Alloy rigging-screw protectors.
• Sailtec hydraulic backstay adjustment for insulated backstay (2023).
• Stainless steel standing rigging – Fully renewed 2013.
• Lupo masthead LED lights.
• Port and Starboard Lupo LED nav lights.

Winches:

• 2 x Andersen 58STE 2-speed self-tailing electric genoa winches.
• 2 x Andersen 46ST 2-speed manual self-tailing secondary winches.
• 1 x Andersen 46ST 2-speed manual self-tailing spinnaker halyard winch on mast.

Sails:

• Sanders Carbon Cruise Lam laminate (2015) tri radial mainsail with full length vertical battens.
• Sanders Carbon Cruise Lam Laminate furling genoa (2015) circa 130% tri radial short battens.
• Dacron storm jib on hanks – approx. 16sqm.
• Sanders Code 0 full radial 2.50z.
• Cruising Chute on Bamar roll gen.
• 1 x Dacron genoas.

General:

• Alloy windscreen with stainless steel grab rails outboard.
• Dorade vents with stainless steel dorade pushpits.
• Stainless steel pushpit and pulpit.
• Teak step in pulpit.
• Side-boarding gates to port & starboard and opening gate in transom.
• Stainless steel folding bathing platform ladder.
• Teak pushpit seats.
• Folding varnished teak cockpit table with canvas cover.
• Varnished companionway top.
• Carbon fibre passerelle.

Anchoring & Mooring Equipment:

• Twin stainless steel anchor roller on stemhead fitting.
• Lofrans Monza 24vDC 1500w reversing electric anchor windlass with remote control.
• 30kg Rocna anchor with 100m of chain.
• Forward, aft and two sets of mid cleats.
• Warps & fenders.

Covers, Canvas & Cushions:

• Burgundy canvas sprayhood (2023).
• Burgundy canvas cockpit tent extension with stainless steel frame (2023).
• Burgundy canvas bimini with stainless steel frame (2023).
• Full cover.

Tender & Outboard:

• Besenzoni fully retractable davits.
• Teak outboard bracket on pushpit.
• Torqeedo 1003 electric outboard (2014).
• Lightweight inflatable dinghy by 3D Tenders (2012).

Safety Equipment