English
Beneteau Oceanis 343 Clipper bult in 2005 sleeps seven in a two cabin layout plus saloon. 'Avalon' comes with a Yanmar 29hp engine on a shaft drive, cherry interior with blue upholstery, heating, autopilot, Raymarine electronics, midship cleats, opening side gates and much more. A very popular cruising boat ideal for a couple, family and friends
Rig
Sloop
SLOOP RIGGED
Z-Spars aluminium mast and spars, swept back spreader rig
Stainless steel standing rigging (Jan 2020)
Running rigging
Furling headstay
Slab reef mainsail with stackpack and lazy jacks
Whisker pole
SAILS
Mainsail (2017)
Furling genoa (new UV strip 2019)
WINCHES
Harken 32 two speed self-tailing halyard winch (one)
Harken 40 two speed self-tailing genoa winches (two)
NAVIGATION AT HELM CONSOLE
Compass
Raymarine Axiom 9 and AIS (2018)
Raymarine autopilot
Raymarine wind
Raymarine Tridata
NAVIGATION AT CHART TABLE
Sony stereo
Furuno Navtex
Simrad VHF
A.I.S Radar
Raymarine Multi
Raymarine C70
GROUND TACKLE
Anchor with warp and (new chain 2021)
Lofrans electric windlass
GENERAL EQUIPMENT
Navigation lights
Bathing ladder
Sprayhood (2017) with stainless steel aft handrail and side rails
Binacle cover
Warps and fenders
Stainless steel pulpit and guard rails
Saloon speakers
Cockpit speakers
Clock
Midships mooring cleats
Opening side gates in guard rails
Set of cockpit cushions
SAFETY
Manual bilge pump
Electric bilge pump
Radar reflector
Danbuoy, rescue sling and Jon buoy (may need servicing by purchaser)
YANMAR 3YM30 29HP DIESEL ENGINE
Engine service (Sept 2023)
Engine hours (dial not working)
Shaft drive
Folding Gori prop
Rope cutter
ELECTRICS
Domestic batteries two (2021)
Engine battery one
Charged by engine alternator and battery charger
Shore power with cable
TANKAGE
Fuel 75 L
Fresh water two tanks total 255 L
Holding tank with 3 way valve
WATER SYSTEM
Pressurised hot and cold fresh water system
(All figures are approximate)
BENETEAU OCEANIS 343 Clipper
Built in 2005
Built by Beneteau, France
Designed by Berret-Racoupeau
CONSTRUCTION
White GRP hull, deck and superstructure
Teak laid to cockpit seats
Wheel steering
Fin keel
Spade rudder
DEMENTIONS
LOA: 10.38m (34.96')
LWL: 9.40m (30.83')
BEAM: 3.48m (11.41')
DRAFT: 1.85m (6.07')
DISPLACEMENT: 5,400kg
Antifoul & anodes (Aug 2022)
(All figures are approximate)