Cornish Crabbers 24 Cutter for sale (1999) in Oban, Argyll,

£19,500 GBPFinance this boat

AI-generated summary

The Cornish Crabbers 24 Cutter, located in Oban, Argyll, is a 1999 model admired for its traditional design and versatile performance. This 9.29-metre yacht, known as DEIRDRE, features a retractable bowsprit and gaff rig that enhance its sailing prowess. It offers accommodation for up to five people with a galley, heads compartment, and chart table. Powered by an optional Yanmar 2GM20 engine, the yacht is equipped with navigation and domestic essentials, including a Raymarine autopilot and Eberspacher heater. Maintained by its original owners, DEIRDRE is well-preserved with recent antifouling and topside polishing. This cutter is designed for exploration with its shallow draft and is ready for viewing on her mooring at Creran Marine.

About this Cornish Crabbers 24 Cutter

General information
Make/model
Cornish Crabbers 24 Cutter
Price
£19,500 GBPFinance this boat
Price comment
One owner boat, lightly used since new
Category
Used sail boat for sale
Name of boat
DEIRDRE
Year
1999
Location
Oban, Argyll,

The Cornish Crabber 24 with her traditional lines and rig is a greatly admired design in any marina. With the retractable bowsprit enhancing the sail area considerably her performance in all weathers is admirable while with the sprit retracted berthing prices are more reasonable. Offering accommodation for 5 below decks the Crabber 24 is a proper little yacht with galley, heads compartment and chart table. Easily handled her shallow draft lets her crew explore waters others can’t.

With her original owners since leaving the factory the Cornish Crabber 24 DEIRDRE was displayed at the Earls Court Boatshow in January 2000. A cherished member of the family, wintering ashore under her full boat cover annually and professionally serviced since new. Her inventory highlights include:

Topsides washed and professionally polished spring 2025.

Below waterline surfaces finished in red antifouling, applied spring 2025

Optional larger Yanmar 2GM20 (19hp) marine diesel engine

Raymarine ST2000+ Tiller pilot

Raytheon ST60 depth instrument

Cobra Marine Submersible DSC VHF with in-built GPS

Plastimo Neptune 2000 gas cooker, 2 burner, grill and oven, gimbal mounted

Jabsco manual marine toilet

Eberspacher diesel fired blown air heater

Gaff rigged, masthead cutter rig with jackyard topsail.

Mast replaced with new item in 2022

A lightly used example the Cornish Crabber 24 DEIRDRE has just recently been launched for the season and is now available for viewing on her mooring at Creran Marine, near Oban.

CONSTRUCTION

Hull Construction:

GRP traditional moulded single-piece hull in a simulated planking style.

Full-length traditional long keel.

Moulded internal structural lining forming the base to the furniture unit in the accommodation

Hull portlights forward, port and starboard.

Hull finished externally in the original navy gelcoat with white boot.

Topsides washed and professionally polished spring 2025.

Below waterline surfaces finished in red antifouling, applied spring 2025

Deck & Superstructure Construction:

GRP traditional moulded deck with an incorporated cockpit with moulded bench seats and moulded toerail outboard.

Deck moulding finished externally in the original cream gelcoat.

Stanchion supported double tier guard wires running the length of the decks.

Port lights in elevated coachroof superstructure sides.

Solid teak grab rails on coachroof top.

Port and starboard cockpit lockers, lazarette locker aft of cockpit, lined and self-draining for use as gas bottle storage

Wooden cockpit grating.

Keel & Rudder:

Traditional full-length GRP moulded keel

Encapsulated ballast

Skeg hung rudder aft.

MACHINERY

Engine & gearbox:

Yanmar 2GM20.

19hp

2 cylinder, naturally aspirated, directly cooled marine diesel engine.

Kanzaki mechanical reversing marine gearbox.

Single lever morse control

Maintenance & Performance:

Engine professionally serviced since new

Engine serviced spring 2025

Cruising speed 5.5kts

Propulsion & Steering:

Conventional stainless steel shaft

Greaser type sterngland

Fixed, 3 blade, bronze prop.

Tiller steering

Autopilot:

Raymarine ST2000+ Tiller pilot

ELECTRICAL SYSTEMS

Voltage systems:

12VDC onboard power system

Battery Banks:

Battery 1 – 12VDC Lead-acid

Battery 2 - 12VDC Lead-acid

Alternator:

Single-engine driven 12VDC alternator

Solar Panel:

NASA 10w panel with trailing lead

General Electrical:

12VDC charging socket at companionway

Voltmeter showing voltages in both batteries

PLUMBING

Fresh Water:

Manually pumped cold water only system

Manual tap in galley

Bilge Pumps:

Manual bilge pump

TANKAGE

Fuel:

Single diesel tank

Approximate capacity 55ltr

Fresh Water:

Single fresh water tank.

Plastimo flexible tank

Approximate capacity 100ltrs

NAVIGATION & COMMUNICATION EQUIPMENT

On Deck:

Depth – Raytheon ST60

Magnetic compass

Communications Equipment:

DSC VHF – Cobra Marine Submersible DSC VHF with in-built GPS

DOMESTIC EQUIPMENT

Galley:

Galley Stove – Plastimo Neptune 2000 gas cooker, 2 burner, grill and oven, gimbal mounted

Sink

Brass manually pumped tap

Heads:

Jabsco manual marine toilet

Heating:

Eberspacher diesel fired blown air heater

Thermostatic cabin controller with timer

Outlet in cabin and heads

Lighting:

Overhead lighting below decks

Red/White chart table working light

ACCOMMODATION

Summary of Accommodation:

5 berth layout

Two occasional forepeak berths

Two large singles, converting to an occasional double berth

Quarter berth

Removable saloon table.

Separate heads compartment with manual marine toilet.

Accommodation Finish:

Internal GRP moulding forming base to furniture units

Joinery in teak veneered marine plywood with solid teak trims

Timber slats to line hull sides

Navy upholstery, stored off boat when laid up

Description of Accommodation from Forward:

Large storage locker forward with double opening louvered doors

Forward bulkhead can fold down flat to create elevated double bunk with additional cushions

U-shaped settees wrapping around stainless steel compression post

Saloon table mounted on compression post, height adjustable or can be stowed against deck head when not in use.

Galley stove mounted to port aft of seating, gimbal mounted gas cooker with stainless steel crash bar

Nav-Station/Galley unit to starboard opposite cooker

Teak-topped working area with inset stainless steel sink beneath covering panel

Lined, top loading locker outboard of sink, beneath covering panel

Storage locker beneath worktop unit

Navigators seating at forward end of quarter berth with foot well tucking beneath chart table

Storage unit outboard of forward end of quarter berth

Quarter berth extending aft along starboard side

Self-contained heads compartment to port with Jabsco manual marine toilet

Companionway steps lift out to provide access to engine

DECK EQUIPMENT

Rig:

Gaff rigged, masthead cutter rig with jackyard topsail.

Timber mast and spars

Mast replaced with new item in 2022

Retractable timber bow sprit

Roller reefing head sails

Gaff rigged, slab reefing mainsail

Running backstays with block and tackle style tensioners

Winches:

Jib Winches - 2x Lewmar 8, single speed.

Stay Sail Winches - 2x Lewmar 8, single speed.

Cockpit Halyard / Reefing Winches - 2x Lewmar 8, single speed.

Sails:

Mainsail – Gaff rigged, slab reefing.

Yankee – roller reefing

Staysail – roller reefing

Jackyard Topsail

Canvas Work:

Mainsail Cover – Burgundy

Jackyard Topsail Deck Cover – for storing sail on deck when bent onto yards

Sprayhood – Burgundy

Full Winter Cover – With wooden supporting framework

Anchoring & Mooring:

Bower Anchor – 25lb CQR on 35m chain rode

Kedge Anchor – Danforth style anchor with short chain rode

Anchor Windlass – Simpson Lawrence type, low profile, manual

Mooring Warps – Selection

Fenders - Selection

General:

Bow rollers to port and starboard sides of bowsprit

Anchor stowing in port side bow roller

Stainless steel forward mooring cleats as part of stainless steel bowsprit mounting

Stainless steel midships and aft mooring cleats to port and starboard

Stainless steel stanchions supporting double-tier guardwires

Stainless steel deck rings for securing rolled up tender on foredeck

Teak grabrails mounted on coachroof to port and starboard sides of the mast

Rope clutches on coachroof for lines lead aft to cockpit

Stainless steel boarding ladder forming central fold-down section of stainless steel pushpit rail

SAFTEY EQUIPMENT:

General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.

Navigation Lights:

Masthead anchor light/steaming light

Low-level navigation lights

Life saving:

Horseshoe lifebuoy

Webbing Jackstays

Collapsable Radar Reflector

DISCLAIMER

In this case we are acting as brokers only.

The Owner is not selling in the course of a business. whilst every care has been taken in their preparation , the correctness of these particulars is not guaranteed. The Purchaser is strongly advised to check the particulars and where appropriate at their expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability for such engine on our part.

This vessel is offered subject to prior sale, price change, or withdrawal without notice

Read more

Construction
Hull
GRP
Keel
Long Keel
Measurements
Length overall
9.29 metres
Length waterline
6.32 metres
Beam
2.59 metres
Draft
1.07 metres
Displacement
3,605 kg
Propulsion
Engine
Yanmar 2GM20. 19hp 2 cylinder, naturally aspirated, directly cooled marine diesel engine. Kanzaki mechanical reversing marine gearbox. Single lever morse control
Fuel
Diesel
Fuel capacity
55 litres
Accommodation
Drinking water capacity
100 litres
This Cornish Crabbers 24 Cutter has been viewed 1,047 times
Broker/Dealer Information

Mark Cameron Yachts

Mr Mark Cameron
The Braes
Inverneil
PA308ES
United Kingdom
Please mention that you saw this boat on TheYachtMarket.
Call seller
ABYA Logo
ABYA YACHT BROKER

Setting the standards in yacht broking and conveyancing since 1912

Find out more

Thank you

Your message has been sent.

Report this boat

Ask for more photos

Email to a friend

By submitting this form, you agree to our Privacy & Cookie Policy

By submitting this form, you agree to our Privacy & Cookie PolicySite protected by Google reCAPTCHA
Privacy Policy and Terms of Service apply

Report this boat

Thank you, your message has been sent

Why not register your interest in these similar boats?

We will send the following details to the sellers of the selected boats: Your name, email address, phone number (if provided). your country and which boat(s) you are interested in.

Request More Information

Change units of measure

This feature requires cookies to be enabled on your browser.

Show price in:

Show lengths, beam and draft in:

Show displacement or weight in:

Show capacity or volume in:

Show speed in:

Show distance in: