Gammo Stampi JUMP 33 RACER (1996) te koop in BARCELONA, Spanje

£29.786 GBP
Verkoopprijs €35.000 EUR
Belastingen Betaald / inclusiefVraag een valuta-offerte aan

Samenvatting

De Gammo Stampi Jump 33 Racer, gelegen in Barcelona, ​​Spanje, is een competitief zeilschip ontworpen voor prestaties. Met een totale lengte van 9,98 meter en een breedte van 3,40 meter biedt dit model uit 1996 een uitgebalanceerde mix van snelheid en stabiliteit voor raceliefhebbers.

Algemene informatie
Merk/model
Gammo Stampi JUMP 33 RACER
Categorie
Used boot voor verkoop
Prijs
£29.786 GBP | Verkoopprijs €35.000 EURVraag een valuta-offerte aan
Belasting-/BTW-status
Betaald / inclusief
Naam van boot
JUMP 33 RACER
Jaar
1996
Ontwerper
Besozzi Selveti
Lengte - totaal
9,98 meters
Breedte
3,40 meters
Diepgang
2,15 meters
Waterverplaatsing
2.900 kg
Romp
GRP
Kiel
Bolvormige kiel
Locatie
BARCELONA, Spanje

Meer info Gammo Stampi JUMP 33 RACER

Lees meer

Aandrijving
Motor
Yanmar GM18 18CV Cruising Speed: 6 kn Propeller: Folding 2 blades
Brandstof
Diesel
Brandstofcapaciteit
50 liter
Kruissnelheid
11 km/h
Accommodatie
Aantal hutten
2
Drinkwatercapaciteit
150 liter
Aanvullende accommodatiegegevens
Very fast racer cruiser

The boat is light and very fast in any direction with little wind and extremely fast downwind in strong winds as reflected in its 2018 rating. Among its achievements is having won the Giraglia in the regatta division in 1997 and in 2004. In addition to many local regattas now with its new configuration. She sails in real time ahead of Grand Soleil 40, First 40.7 or XP38 and is not comparable to a modern ¾ IOR or contemporary boats of the same length.

Builder: Gammo Stampi

Designer: Besozzi Selveti

The Jump 33 Racer is a boat designed under IMS regulations with a hull with clean lines, no launches and a generous draft of more than two meters and ten centimeters, similar to Farr's designs, the Mumm 30 or 36. 3 were made units in Italy and the project was rejected because the boat was more expensive to build than a 40-foot Beneteau due to the materials used. With an open cockpit but with a cabin that allows a person of 1.85 cm to stand upright, we are looking at a racing boat with cruising capacity thanks to its two independent double cabins and its closed bathroom, as well as a spacious and bright dinette. She has a large stowage box in the stern to carry a dinghi for example. Also unlike other racing boats, she is equipped with an 18 horsepower Yanmar engine that allows her to motor sail at more than 6 knots.

ACCOMODATIONS

Cabins: 2

Bath Shower: Yes

Notes: separate toilet in bow

EXTRA

Television: YES

Radio Cd: YES

Speakers Cockpit: YES

Swimming Ladder: YES

Extra Notes: The boat has a TV, stereo, refrigerator, battery charger and pressurized water, as well as interior and exterior LED lights and a summer mesh awning.

ENGINE

Engines: Yanmar GM18 18CV

Cruising Speed: 6 kn

Propeller: Folding 2 blades

TANKS

Fuel 50 l

Water 150 l

GALLEY

Coolbox: Yes

Refrigerator: Yes

Water System: Yes

ELECTRONICS

Electronics: B&G 2000 HERCULES

Gps: YES

Vhf: RAYMARINE

Plotter: YES

Notes: B&G 2000 Hercules with 2 displays and two maxis on the stick with fluxgate compass, wind and depth sounder. It also has a B&G Vulcan 7” with a graphic probe and a crack in the screen but 100% functional and a map of the area. The boat has a Raymarine fixed VHF with 2 stations.

B&G 2000 electronics with performance computer and autopilot from 2005

ST4000 autopilot from 2010, the 2 pilots have the same Raymarine power unit which goes on the helm.

B&G wind compatible.

B&G 7” plotter 2018 with broken display but it works well.

Batteries: 2

Battery Charger: Yes

SAILS

Sails: 1 Pentex cruising mainsail in good condition with advertising 60% (skates) 1 blue laminated racing mainsail 80% (roofline) 1 jib 2 with Dacron solar band (to review) 1 100% Dacron hard wind jib 4 1 jib 2 laminated regatta with forced battens (not furling) 80% 1 jib 3 laminated with diamond forced battens 50% 1 set of 100% cape candles 1 S1.5 large symmetrical spi with advertising 80% 1 S2 small symmetrical espi with advertising 80% 1 A3 asymmetrical spiral 60% Mainsail 2 units 35 m2 Bow sails 3 units from 22m2 Supporting sails 2 spi 1 asymmetrical from 80m2

SPARS & RIGGING

Rigging: Rod

Mast: Carbon

Boom: Aluminium

Vang: Yes

Spinnaker Pole: Yes

Running Rigging: Dyneema

Furling System: Yes

Notes: The rig was changed in 2015, installing a Sparcraft double-decker carbon mast with set back spreaders and slightly fractionated that rests on the keel and the shrouds on the gunwale. The rigging is made of rod and retains the original lightened aluminum boom. The stick weighs 70 kg less than the original, lowering its center of gravity. Burdas were eliminated and maneuvering speed was gained with a jib in the bow, easy to turn, and a 5-meter larger mainsail. The cockpit maneuver has been redesigned, improving clearance and allowing easier and more accessible navigation, even with a reduced crew. The 6 winches are self-chasing and oversized Harken winches and the main and its outhaul are easily controlled from the tiller, as well as the jib trim. The modern rig is derived from that of a Beneteau Figaro 2, the same measurements making it easy to find used sails in France. The saddle as well as the back are made of dyneema. The boat has a genoa furler with endless line and lazy Jack and lazybag to facilitate solo sailing. She comes equipped with a light carbon pole for symmetrical and a retractable bowsprit from the cockpit for asymmetrical spinnaker.

DECK

Deck Hardware: Harken

Winches: Harken

Notes: The 6 winches are self-chasing and oversized Harken winches and the main and its outhaul are easily controlled from the tiller, as well as the jib trim.

SAFETY

Fire Extinguishers: YES

CONSTRUCTION

Keel elephant's foot type

Notes: Profiled keel and rudder, integrated thru-hull, stripped to the gelcoat and treated in 2018, annual maintenance is done with International Micron antifoulig, rigid and profiled saildrive box. The boat is made of Vinylester so it has no osmosis and has extreme rigidity without cracks in the deck. The elephant's foot type keel is made of lead.

The whole boat is in Vinilester, very solid construction.

NOTES:

Not AIS

Coastal navigation category no rafts.

Deze Gammo Stampi JUMP 33 RACER is 143 keer bekeken
Makelaar/dealer Informatie

Cruiser Racer

Mr Toni Guiu
Buscarons, 6.
BARCELONA
Barcelona
08022
Spain
Geef alstublieft aan dat u deze boot op TheYachtMarket hebt gezien.
XXXX XXX XXX

Hartelijk dank

Uw bericht is verzonden.

Verzoek meer foto's

E-mail naar een vriend

Door dit formulier in te dienen, gaat u akkoord met ons privacy- en cookiebeleid

Door dit formulier in te dienen, gaat u akkoord met ons privacy- en cookiebeleidSite wordt beschermd door het privacybeleid van Google reCAPTCHA en de voorwaarden zijn van toepassing

Rapporteer deze boot

Dank u, uw bericht is verstuurd

Waarom zou u niet uw interesse in deze gelijksoortige boten registreren?

We sturen de volgende gegevens naar de verkopers van de geselecteerde boten: Uw naam, e-mailadres, telefoonnummer (indien gegeven), uw land en in welke boot/boten u geïnteresseerd bent.

Eenheden of maten wijzigen

Voor deze functie moeten de cookies in uw bladerprogramma ingeschakeld zijn.

Prijs weergeven in:

Lengte, breedte en diepgang weergeven in:

Verplaatsing of gewicht weergeven in:

Capaciteit of volume weergeven in:

Snelheid weergeven in:

Afstand weergeven in: