Breaux Breaux's Bay Craft Inc. Custom Dive Boat (1967) in vendita in Tortola, Isole Vergini Britanniche

English

MASSIVE REDUCTION

Now Asking ONLY $69k

Seller is ready to make a deal!

Amazing business opportunity for someone looking for a turn-key operation ready to start making money! 35 Pax Aluminum Dive/Snorkel boat already here in the BVI and fully imported to the BVI. The perfect boat for loading up passengers and showing them the beauty that the BVI has to offer!

'Rockin' Dive' was formerly the 'Miss Key West' running charters out of Key West Florida for many years before her recent refit. This vessel is a single screw aluminum, displacement type vessel, fully customized for snorkel trips, commercial or recreational SCUBA dive trips. 'Rock N' Dive' has a flush deck, open seating areas around the perimeter, helm station, wet bar and a marine head, aluminum hard top and a massive fold down dive platform.

Check out the full listing at bviyachtsales.com or contact Chesnee Cogswell directly at chesnee@bviyachtsales.com to schedule a showing or make an offer. 

HULL

• Bottom and side plating generally consist of 1/4" thick aluminum.
• Bottom plating in way of propellers is constructed of 5/16" thick aluminum.
• Deck plating is estimated to have been approximately 1/4" thick aluminum original.
• Hull is framed longitudinally utilizing 3" x 2" x 1/4" aluminum t-frames on 16" centers
• Hull is framed transversely utilizing 4" x 2" x 1/4" aluminum t-frames on 16" centers
• Deck longitudinal frames are 3" x 2" x 1/4" aluminum ?I? beams on 16" centers.
• Vessel is divided by 2 transverse bulkheads.
• The exterior hull is protected by an 2 1/2" aluminum double strake rub rail and portable docking bumpers

DECK

• The deck is constructed of aluminum panels, fitted with various hatches leading into lower hull compartmentation.
• Deck fittings consist of an adequate complement of cleats, chocks, and lifting eyes strategically located throughout
• the deck and top of gunwale. Vessel is available to launch and be hauled via lifting eyes with crane.
• The forepeak and perimeter of the gunwale is fitted with a diamond plate skid resistant deck plating.

ACCOMMODATION

• Accommodations include seating for 49 passengers in custom dive boat benches that encompass the parameter of the vessel. Subject seating arrangement contain custom brackets that cradle SCUBA tanks at each seat that have been modified to hold snorkel gear but can easily also hold tanks.
• The deck contains two aluminum deck mounted consoles. Forward console is the navigation station and the other serves as the Dive Masters podium and/or a Wet Bar for entertaining guests with storage shelving built in. 
• Marine head (bathroom) on the aft deck. Vessel is equipped with an AHEAD® type II marine sanitation system. System serves a typical yacht type head
  located on deck inside aluminum enclosure.

NAVIGATION STATION

• Navigation station is an aluminum console set atop the deck. .
• Navigation station containing an operators chair, and navigational instruments.
• The navigation station contains the following principle equipment:
• 15" Destroyer type stainless ships wheel.
• Morse throttle and clutch controls.
• Yanmar engine gauges.
• Gauge set contains, one (1) rpm gauge, one (1) oil pressure gauge, one (1) water temperature, gauge, one (1) buzzer stop switch, one (1) panel illumination switch, one (1) key switch and one (1) emergency stop button.
• Electrical switch panel with voltage meters, toggle switches for navigational and deck lighting, and two (2) 12 volt plugs-in outlets.
• Bilge alarm/switch serving forepeak compartment, MSD compartment, machinery space and rudder compartment.
• Electric horn
• Bestik 300W power inverter

ELECTRICAL

• The vessel is wired with neoprene covered type wiring. Fixtures are of the yacht type. 12-volt, DC. Switchboard is of the toggle switch type. 
• Overload protection is via circuit breakers and fuses. 
• Three (3) 12-volt heavy duty marine type batteries are aboard, two stowed below deck in approved battery box and one adjacent to the navigational electronics. 
• (1) battery switch.

MACHINERY

• Propulsion machinery is electric starting.
• Engine is served by a racor fuel filtration system.
• Propellor is 22 x 20 three (3) blade wheel
• Shaft is 2" stainless steel.