Contessa 28 (1979) for sale in Argyll, United Kingdom

General information
Make/model
Contessa 28
Category
Used sail boat for sale
Price
Price comment
Fantastically well presented example
Name of boat
ELISE
Year
1979
Designer
Doug Edwards
Length overall
8.43 metres
Length waterline
6.71 metres
Beam
2.88 metres
Draft
1.49 metres
Displacement
3,160 kg
Hull
GRP hull with bolt-on ballast keel
Keel
Fin Keel
Location
Argyll, United Kingdom

About this Contessa 28

English

Following the success of her older sisters the Contessa 28 came from the board of Doug Peterson and was aimed towards the cruiser racer end of the market and a move toward serious production boat building for Jeremy Rogers. The Contessa 28 being one of the first designs manufactured by Rogers to feature the internal moulding which provides structure to the hull and creates the base of the furniture units.

The Contessa 28 ELISE benefits from significant upgrading in recent years, offered for sale with an extensive inventory including highlights such as:

Original gelcoat finish to topsides

Coachroof portlights removed and professionally overhauled in 2021

Yanmar 2GM20, 19hp marine diesel engine

Overhaul of engine fuel and exhaust systems in 2018/19

Featherstream 3-blade feathering propellor

Shore power system with battery charger

Raymarine C80 Classic chart plotter

Raymarine i40 depth/speed instrument display (2021)

Autohelm ST40 wind instrument

Raymarine ST1000+ tillerpilot

All LED lighting below decks (2019)

Eberspacher diesel fired blown air heating system, installed new 2021

Fusion MS-RA50 stereo system

Standing rigging replaced for 2021 season

North Sails dacron mainsail, new 2018

North Sails 3Di roller reefing genoan, new 2018

Stack pack mainsail cover from Owen Sails, new 2022

Having wintered ashore the Contessa 28 ELISE has been freshly polished and antifouled, presented for sale ready to sail away for the 2024 season. Available for immediate viewing by prior arrangement.

CONSTRUCTION

Hull Construction:

Single piece GRP moulded hull.

Internal GRP moulded lining.

Plywood bulkheads with teak veneer finish

Keel pan stiffened as suggest by builder.

Topsides finished in gelcoat with blue coveline

Hull finished below water line in blue antifouling.

Deck & Superstructure Construction:

Single piece moulded deck incorporating self-draining cockpit and superstructure.

GRP moulded headlining internally

Moulding finished in white gelcoat.

Grey non-slip moulded finish to decks and coachroof top.

Coachroof portlights removed and professionally overhauled in 2021

Hardwood grating on cockpit sole.

Keel & Rudder:

Encapsulated fin keel

Lead ballast

Spade rudder

Rudder removed in 2018, internal inspection of blade completed and rudder rebuilt and re-fitted

Rudder bearings replaced in 2018

MACHINERY

Engine & gearbox:

Yanmar 2GM20

(19hp)

2 Cylinder, naturally aspirated, raw water cooled

Mechanical reversing marine gearbox

Single lever morse control (2021)

Maintenance & Performance:

Engine serviced annually

All seacock Blakes seacocks removed in 2018, stripped, serviced and re-fitted with new fastenings

Engine cooling hoses replaced 2018

Fuel supply lines to engine replaced 2018

Exhaust hose and skin fitting replaced 2019

Engine compartment sound insulation removed and replaced with new 2019

New starter motor fitted 2021

Injectors removed and sent for professional overhaul and recalibration 2022

Cruising speed under engine 5.5kts

Propulsion & Steering:

Stainless steel prop shaft

Volvo Penta type sterngland, fitted new 2021

P-bracket

Featherstream 3-blade feathering propellor

Hardwood laminated tiller

Tiller extension

Autopilot:

Raymarine ST1000+ tillerpilot

ELECTRICAL SYSTEMS

Voltage systems:

12VDC onboard power system

230VAC shore power system

Shore Power:

Extension cable to connect to shore supply

230VAC sockets in saloon

Battery charger

Battery Banks:

Engine Battery – 1x 12VDC, 90Ah lead acid (2019)

Domestic Battery - 1x 12VDC, 90Ah lead acid (2019)

New battery cables for engine start circuit installed 2019

Alternator:

Single engine driven 12VDC alternator.

Battery Charger:

Pro-Sport 8 dual bank battery charger

230VAC – 12VDC, 8 amp

General:

12VDC charging socket in saloon

PLUMBING

Fresh Water:

Manually pumped cold water only system

Manual pump faucet in galley.

Bilge Pumps:

Manual bilge pump in cockpit

Skin fitting for outlet replaced 2019

Gas System:

Gas pipe work replaced 2018

TANKAGE

Fuel:

Single stainless steel diesel tank

Approximate capacity 50ltrs

Tank drained, opened up and cleaned before re-fitting (2021)

Fresh Water:

Single water tank

Approximate capacity 55ltrs

NAVIGATION & COMMUNICATION EQUIPMENT

On Deck:

Depth/Speed – Raymarine i40 display (2021)

Wind – Autohelm ST40

Magnetic Compass

Below Decks:

Plotter – Raymarine C80 Classic

Communications Equipment:

DSC VHF – Icom IC-M421 DSCVHF

DOMESTIC EQUIPMENT

Galley:

Galley stove – Flavel Vanessa gas cooker, 2 burner, grill and oven

Inset, GRP moulded sink

GRP moulded worktop

GRP moulded, top loading coolbox

Heads:

Lavac manual marine toilet.

Bulkhead mounted wash hand basin

Heating:

Eberspacher diesel fired blown air heating system, installed new 2021

Thermostatic cabin controller

1 outlet in saloon, 1 outlet in forward cabin

Lighting:

Overhead lighting below decks

Engine space light

Light fittings upgraded to LED in 2019

Entertainment:

Fusion MS-RA50 head unit

Speakers in saloon

ACCOMMODATION

Summary of Accommodation:

6 Berths over two cabins

Double cabin forward

Saloon converting to two singles

Quarter berth

Accommodation Finish:

Joinery of teak veneered plywood with solid teak trims.

Internal woodwork stripped and fully re-varnished in 2021

Moulded headlining with vinyl covered ply closing panels

Upholstery recovered throughout in 2019

Description of Accommodation from Forward:

Forward Cabin:

Open space with heads at aft end of space.

Double V-berth provided forward

Bulkhead at aft end of bunk to separate berth from heads.

Cave type storage lockers outboard of bunk port and starboard.

Shelves running the length of the bunk outboard port and starboard.

Heads:

Separated from main saloon with door in main bulkhead.

Inboard facing manual marine toilet located outboard.

Wash hand basin mounted on bulkhead.

Wet locker with hanging rail outboard of heads

Hanging locker to port.

Saloon:

Bench settees port and starboard.

Both settees convert to bunks.

Port settee providing single berth with ‘trotter box’ to extend bunk length.

Starboard bunk converting to single berth

Centrally mounted, drop leaf, saloon table.

Storage lockers below bunks and overhead outboard.

Quarter berth extends aft of saloon on starboard side.

Drop down chart table fitted over quarter berth. Storage in table for charts and pilot books.

Galley:

Port side of companionway.

Worktop along aft end from starboard side of companionway outboard to port.

Wooden sectional worktop with fiddle which lifts out to access sink and coolbox.

Gimbal mounted cooker outboard with fold up extension worktop

forward of cooker.

Storage beneath work top and cooker with sliding door lockers outboard of cooker.

DECK EQUIPMENT

Rig:

Deck stepped, mast head sloop rig.

Mast and spars by Kemp in silver anodised alloy.

All standing rigging of 1x19 stainless steel wire with roll swage terminal fittings.

Standing rigging replaced for 2021 season

Facnor SD130 roller reefing system on forestay

Mechanical backstay adjuster

Mid boom mainsheet.

Roll-up mast ladder

Spinnaker pole and gear

Lines run aft to cockpit on port an starboard sides.

Running rigging replaced periodically as required

Deck mounted rope clutches port and starboard sides of companionway

Winches:

Primary Winches – 2x Lewmar 30, two-speed, self-tailing

Secondary Winches – 2x Lewmar 16, two-speed, self-tailing

Cockpit Halyard Winch – 1x Lewmar 16, two-speed

Mast Halyard Winches – 2x Lewmar 7, single-speed

Mast Reefing Winch – 1x Lewmar 7, single-speed

Sails:

Mainsail – White, dacron, slab reefing. North Sails 2018

Genoa – North 3Di roller reefing. North Sails 2018

Cruising Chute

Canvas Work:

Mainsail Cover – Stackpack type cover with mast boot. Owen Sails (2022)

Sprayhood

Anchoring & Mooring:

Bower Anchor – Bruce anchor with chain and warp rode

Selection of warps and fenders.

Boathook

General:

Stainless steel pulpit and pushpit rails.

Alloy toerail running length of deck edge.

Stainless steel stanchions supporting double-tier stainless steel guardwires

Upper guardwire replaced on both port and starboard sides in 2018

Single stemhead roller.

Below decks, self draining anchor locker.

4 mooring cleats.

Non-slip textured finish to decks, coachroof and cockpit.

Halyards lead aft along port and starboard sides of coachroof.

Moulded cockpit coamings providing protection to cockpit.

Primary and secondary winches mounted on coamings outboard..

Bench seating in cockpit port and starboard with hard wood panel finish.

Liferaft storage compartment beneath starboard seating.

Large cockpit locker beneath port cockpit seating.

Mainsheet track spanning coachroof, forward of sprayhood.

SAFTEY EQUIPMENT:

General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.

Navigation Lights:

Masthead Tri-colour and anchor light fitted with new mast cable 2020

Steaming / Deck flood light unit, mounted on mast. Installed new with new mast cable 2022

Low-level nav lights

Life saving:

Horseshoe lifebuoy with light

KIM MOB recovery system

Gas alarm

Carbon Monoxide alarm

DISCLAIMER

In this case we are acting as brokers only.

The Owner is not selling in the course of a business. whilst every care has been taken in their preparation , the correctness of these particulars is not guaranteed. The Purchaser is strongly advised to check the particulars and where appropriate at their expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability for such engine on our part.

This vessel is offered subject to prior sale, price change, or withdrawal without notice

Read more

Propulsion
Engine
Yanmar 2GM20 (19hp) 2 Cylinder, naturally aspirated, raw water cooled Mechanical reversing marine gearbox Single lever morse control (2021)
Fuel
Diesel
Fuel capacity
50 litres
Accommodation
Drinking water capacity
55 litres
This Contessa 28 has been viewed 190 times
Broker/Dealer Information

Mark Cameron Yachts

Mr Mark Cameron
The Braes
Inverneil
PA308ES
United Kingdom
Please mention that you saw this boat on TheYachtMarket.
XXXX XXX XXX
ABYA Logo
ABYA YACHT BROKER

Setting the standards in yacht broking and conveyancing since 1912

Find out more

Thank you

Your message has been sent.

Ask for more photos

Email to a friend

By submitting this form, you agree to our Privacy & Cookie Policy

By submitting this form, you agree to our Privacy & Cookie PolicySite protected by Google reCAPTCHA
Privacy Policy and Terms of Service apply

Report this boat

Thank you, your message has been sent

Why not register your interest in these similar boats?

We will send the following details to the sellers of the selected boats: Your name, email address, phone number (if provided). your country and which boat(s) you are interested in.

Request More Information

Change units of measure

This feature requires cookies to be enabled on your browser.

Show price in:

Show lengths, beam and draft in:

Show displacement or weight in:

Show capacity or volume in:

Show speed in:

Show distance in: