English
Beneteau Oceanis Clipper 343 2-Cabin owners version Fin Keel Built 2006.
This is a well-equipped and maintained example of this hugely popular sailing cruiser from Beneteau Yachts France.
Be quick !!!
Dimensions
Loa: 10.82m
Lwl: 9.40m
Beam: 3.48m
Draft: 1.85m
Displacement: 5,380kgs.
Builders & Designers
Builders: Beneteau Yachts France.
Designers: Berret/Racoupeau.
Engines
1 x Yanmar 3YM30AE inboard marine diesel engine ( New 2017 )
Total Power: 29hp
3 x Cylinders.
Shaft Drive to 3-blade fixed propeller.
Rope cutter.
The engine was last serviced in 2023
Cruising speed: 6knots app.
Maximum speed: 7knots app.
Engine Hours: App. 55hrs of 12/10/2023
Navigation & Electronics
Full Navigation Lighting.
Compass.
Log/Speed
Echo Sounder.
Wind/Speed/Direction.
GPS Chartplotter.
Autopilot.
VHF Radio and Antenna
EPIRB.
Tankage
Fuel Capacity: 75 Litres
Water Capacity: 255 Litres in two plastic tanks.
Holding Tank: 80 Litres in plastic tank.
Construction
The Hull, Deck, and Superstructure are all of GRP.
Teak decking on Transom step and Cockpit seating.
Fin Keel.
Blade rudder.
Stainless steel shaft.
Bronze 'P' bracket.
Mahogany interior wood finish.
Blue cloth upholstery.
Electrics
There are 12v electrics throughout supplied by 3 x 12v batteries ( New batteries 2023 ) which in turn are charged by the engine alternator.
240v shore power supply with in-line battery charger. Cable included.
Accommodations
There are six berths in two separate cabins + the Saloon below decks.
Please see layout plan attached.
Safety Gear
Liferaft ( Last serviced 2017 )
Assortment of Lifejackets.
Fire extinguishers.
Fire Blanket.
Bilge Pumps.
Stainless steel boarding ladder.
Horseshoe lifebelt and holder.
Danbuoy.
Gas Detector.
Horn.
Searchlight.
EPIRB.
Deck Gear
Anchor Roller Stemhead fitting
Electric Anchor Windlass.
Danforth Anchor with 50m of chain.
Spare Anchor.
Opening Ports and Hatches.
Mooring cleats + Fairleads.
Opening Transom + Bathing Platform.
Stainless steel boarding ladder.
Sheet and control winches.
Spars & Rigging
7/8 double spreader fractional rig in anodised aluminium.
Stainless steel standing rigging.
Braided running rigging.
Rod Kicker.
In-mast Mainsail reefing.
Roller Furling Genoa system.
Sails & Canvas
In-mast Mainsail in Dacron from 2006 Good condition
Roller Furling Genoa in Dacron with UV Strip from 2006 in Good condition.
Sprayhood complete with Stainless steel frame Navy Blue acrylic
Wheel and Pedestal cover in Navy Blue Acrylic.
Navigation & Electronics
Full Navigation lighting.
Compass.
Log/Speed
Echo Sounder.
Wind/Speed/Direction.
GPS Chartplotter.
Autopilot.
VHF Radio & Antenna.
EPIRB.
Inventory
TV & DVD
Stereo Radio CD Player with USB port.
2 Burner cooker with oven.
12v/240v Refridgerator.
Hot and cold pressurised water via a calorifier.
Outboard Bracket.
Clock & Barometer.
Boathook.
Liferaft ( Last serviced 2017 )
Inflatable dinghy + 4hp Outboard.
Cutlery Crockery and saucepans.
Assortment of lifejackets.
Warps & Fenders.
Features
- Depthsounder
- Swimming ladder
- Oven
- Outboard engine brackets
- Furling genoa
- Log speedometer
- Hot water
- Vhf
- Wind speed and direction
- Plotter
- Shore power inlet
- Spray hood
- Steering wheel
- Teak cockpit
- Compass
- Furling mainsail
- Battery charger
- Manual bilge pump
- Refrigerator
In this case we are acting as brokers only. The Vendor is not selling in the course of a business. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and / or to have an engine trial conducted, which if carried out by us shall not imply any liability for such engine on our part.
Note to seller and purchaser: If the boat you are selling or purchasing is registered, please ensure that the registration is completed after the sale of the boat. If the purchaser wishes to cancel the registration is the duty of the seller to contact the Registry and inform them that the registration is to be cancelled. If the purchaser wishes to continue with the registration, it is the duty of the purchaser to complete the relevant forms and post off the bill of sale to the Registrar.