Beneteau Flyer 12 in vendita (2006) in Benalmádena, Spagna

Really good condition 

Manufacturer Provided Description

Additional Description

• The self-draining cockpit can be personalised by different fittings: sun bathing bench seat, grill, icemaker etc.
• 3 lockers with gas struts provide 2 stowage lockers and the engine access hatch.
• Electric bathing ladder, with teak steps, is built in on the port side.
• The transom (teak available as an option) disguises an access hatch to the liferaft stowage (dimensions: 96 cm wide, 46 cm high and 40 cm deep).
• Two underwater spotlights (option) are fitted to the bottom of the hull for manoeuvring at night.
• Gate to port with safety flaps and strengthened hinges allows easy access to the cockpit from the bathing platform.
• Cockpit shower with hot and cold pressurised water.

Additional Description

• 15-switch 12V and 220V electrical panel in companionway.
• 220V shore supply.
• One 220V socket to each cabin.
• Two 220V sockets to saloon.
• TV sockets to saloon and forecabin.
• 2 x 12V 140Amp. engine batteries and 6 x 12V 50Amp service batteries.
• 40Amp/h battery charger.
• 2 fuel gauges and an engine hour meter.
• 1000W electric windlass.
• Navigation and anchor lights.

Additional Description

• The galley is unobtrusively positioned in the living area. It has several practical features:
• Wooden work surface.
• Two-burner ceramic hob.
• Built-in microwave with multi-function grill.
• Cutlery drawer and under-sink stowage lockers.
• 2 stainless steel rectangular sinks, mixer tap with hot and cold pressurised water.
• 80L front-opening electric refrigerator.
• Easily accessible waste bin.
• Bottle and spice rack.

Additional Description

• The engines have been chosen according to BENETEAU specifications (reliability, low vibration, reduced smoke emission, compactness).
• The whole boat and the hull in particular have been designed in close collaboration with Volvo to improve handling and performance.
• The Flyer 12 can be powered by 2 x 310 or 2 x 370 HP engines with classic shaft drive or with the IPS Volvo (IPS 400 or IPS 500 propulsion system).
• 4-blade double counter-rotating propellers (with IPS).
• Engine room insulated with high-density foam.
• Fire extinguishing system activated from the wheelhouse.
• 1200 litre fuel capacity in 2 aluminium 600L tanks.
• Fuel filter with sediment reservoir.
• Seawater strainer.
• Fresh air intakes in hull sides for engine room bilge cooling.
• Forced hot air evacuation (electric fans).
• Engine compartment lighting by means of fluorescent tubes.

Additional Description

• The hull is laminated single-skin GRP construction for the topsides, whilst the underwater section is constructed in polyester balsa sandwich to reinforce the structure.
• The structural inner moulding ensures better insulation (thermal and sound) and an improved finish to the accommodation.
• The hull has white gelcoat as standard; ruby red or steel blue are options.
• The Flyer 12 has an evolutionary V-shaped hull with a stiff tulip bow for easy passage through the sea and good spray deflection. It also benefits from the work on hydrodynamics by the Bénéteau Research and Development department, allowing improved performance and comfort under way.

Additional Description

• The deck is balsa sandwich construction (fibreglass /balsa/polyester resin) for maximum strength to weight ratio as well as improved thermal and sound insulation. An inner deck moulding reinforces the structure and completes the finish.
• The deck is totally covered with non-slip gelcoat for complete safety when moving around the boat. The deck is fitted with:
• Stainless steel stemhead fitting designed for stowage of a 20Kg anchor.
• 1000W vertical electric windlass, controlled from the windlass itself and the wheelhouse.
• An anchor well with wide access to protect all the anchoring and mooring gear is fitted with two covers opening respectively into two self-draining compartments.
• Two concealed hatches in the wide side decks give access to the water and diesel tank fillers.
• Salt water washing pump under port hatch.
• 6 x 300 mm stainless steel mooring cleats with stainless steel protection to the bulwarks to prevent wear.
• The deck can accommodate a sunbathing platform as an option.

Disclamer