English
Mudcat MC915 Auger Dredge
Price: $132,500 CDN
Construction material – Steel
Length : 38’ 11″
Width : 9′ 0″
Height : O.A.8’8′
Weight : 21,000 lbs. & Dry
Draft : 21″
Floating Clearance : 6’9″
Fuel Capacity : 360 gallons
Pontoons : Two 36″ x 32″ x 330″
10 Gauge H.R. Steel with Internal Bulkheads and Stiffeners; formed for rigidity; polyurethane foam filled
Auger: Diameter 13-5/8″
Pitch : 11″
Flighting: 3/8″
Speed: Up to 100 RPM
Cutter Knives: 45 Detachable Heat-Treated Blades
Cutter Bars: 36 Detachable Heat-Treated Blades
Auger Torque; 16,500 in. lbs. Rotates to Cut Slope up to 45 degrees
19″ x 9′ Hydraulically Adjustable Cut 9′ wide x 18″ maximum depth
Operating: Depth-15′ maximum
Detroit Diesel: 6-71 RC, 228 BHP @ 2100 RPM
Clutch—Manual: 14″ Dia. Disc & Pressure Plate
Reduction—Gear : Ratio 1.8/1—Drive Coupling Flex Type
Centrifugal Closed Impeller
Impeller Diameter: 19-1/2″
Suction Diameter: 8″
Discharge Diameter: 8″
Shaft Diameter: 2-7/8″
Capacity: 2000 GPM @ 1160 RPM against 180′ Head
Material Removal: To 120 Cu. yds./hr.
Capacity: 75 GPM @ 2800 RPM
Pressure: 80 PSI
Dual Pumps
Capacity Total: 30.5 GPM @ 1800 RPM
Reservoir : 47 Gallon
Circuit One: Auger Drive
Circuit Two: Boom, Mud Shield and Winch
Relief Valve Setting:
Auger : 3000 PSI
Others: 1500 PSI
Treble Sheave Hydraulic Winch
Traverse Speed: 50 FPM Maximum Forward & Reverse
Average Cutting Speed: 8 to 12 FPM
Voltage: 12V
Alt. Output: 65 Ampere
Batteries: 12V, 205 Ampere Hour, Parallel Wired
Circuits: 2 Wire System Full Ground
Polyurethane finish coat on corrosion inhibitive epoxy primer
Standard Colors: Green and White
Located in Eastern Ontario, Canada