Ker 56 à vendre


£1 259 879GBP
Prix répertoriés €1 490 000 EUR

Taxe Payé(e)/inclus(e)

Ker 56 - Default Image
Informations générales
Ker 56
Used bateau pour vente
£1 259 879 GBP | Prix répertoriés €1 490 000 EUR
Commentaire sur le prix
Tax Paid
Régime fiscal / TVa
Longueur totale
17,07 mètres
Carbon Fibre hull
Quille à aileron

À propos de Ker 56


VARUNA VI, is one of the most exciting IRC/ORC offshore boats ever built and now she is ready for her next thrill seeking owner!
The brain child of Jason Ker, this boat is a custom design that was purely built to race offshore, at pace!
Plenty of optimization and modification since launching, led by some of the worlds best sailors, has pushed this boat a long way from its original layout and she is ready to challenge for silverware in the worlds most iconic races.




Hall Spars manufacture, with structural design by SCOTT FERGUSON.

HR Fibre,

2 x Top Mast locks,

1 x Frac lock,

1 x Jib lock

1 x J5 lock

1 x GS Lock

Satin sprayed finish

Boom :

Hall Spars with deep panel section.

3 x Reefing locks


Carbo link Round Side-rigging

Carbo link Forestay

Smartrigging Runner cables.


Blocks: Karver KBRC

Mast Jack: Reckmann

Southern Spars outrigger.

Furlers: 3 x Profurl next generation


Tack 1# - 2 x Tackline 2:1( Kites),

Tack 2# - 2 x 2:1( Kites),

Tack 3# - 3:1 J1 Masthead .

3 x Carbolink Bobstays + 2 x Spares

Broker comments

A true ocean racer that has been staggeringly well prepared and optimized.

Early gremlins, as typical with any custom build, now well out the way now and performance is now proven across many wind ranges and race courses.

Recent 2018 Transatlantic Winner.

Toilet: 1 x in Bow

Kitchen: 2 x jet Boil

Navi: Panasonic tough book

Pipe beds: 7 x Port / 7 x STB

Watermaker: Spectra VENTURA 150-200T 24V

Batteries : 12v Stater , 24 Mastervolt Lithium ULTRA 5000 180AH

Cradle: 20“ Container Flatracek - 12v Hydraulick folding,

Keel on and off Position possible on cradle.

Keel Cradle

Boat: Canting keel Prep reg Carbon

Paint: Topsides Alexseal Flintblack Matt, Duropox Black sanded to 800,

Keel and Ruder ORANGE Sanded to 1000

Rail: Stations , Push and Pullpit Titan G9.

Helmets: 3 x black helmets with screen.

Deck gear box:

spin lock floating jammer, 2x harken hi load snatch block, 4 x snatch block, main traveler cars, main sheet blocks, tack line blocks, 4 x tack line nuggets, 2x tylaska t20 nuggets fitting,

3 x Profurl swivels, carabinas, sail strops, 2x jib lead friction rings, 2x Antal hook for tweaks.

Stanchion: 2 x spare stanchion Titanium G9

Trolley: 1 x folding trolley

Scissor lift: Gerken - max load 270 kg.

4 x fenders:

Air cylinder with 12v pump

6 x fenders: square custom made 0,8m x 0,8m with cover

1 x Box:full cat 1 safety

2 x anchor.  

Shaft:1 spare shaft

Battens:15-20 spare battens for all the sails.

Generator: Honda 3,5 kw 380 v , 230V

Dive compressor :Honda ,2x20 Hoses ,Floating Ring

Diving Box: Stanley box black Diving equipment

Cleaning Box: Stanley cleaning box

Rubber pats: Stanley Box

2x Bow Sprit: short Bow Sprit 1Tack position 2 x Rockback line Exit

Boom Tent: Boom Tent 2015

Main Cover: Main Sail cover for Boom black

3 x Rudders: 2 x Rudders ,1 full spare Rudders 3x Bags with foam black

Dockbag: 6 x 2x 0,8 Meter Gray

2 x Liferaft: Ocean Safety 8 Persons next service 06/2020 Carbon Box

B&G Autopilot: Autopilot for delivery not installed

2 x Board bearings: 2 x set bearings 0 and 2 degrees angle

Tools for keel install

2 x Boxes: Hull/bottom Paint

1 x Munteres airdryer

1 x Prop Spare Prop

1 x Box Bags, Stuff

2 x Boxes spare ropes

1 x Box reef and furl bungee system

Jib trackfor big jibs - not installed

2 x Boxes:16 x Musto HPX trousers

Bow protection2 x stainless bow protection for mooring/anchoring/transport

12 x jerry20L ans


Stay in Phase Custom Package

Grinding pedestal x 2.


Carbon Drive shafts

2 x Overdrive box in Pedestal.


LEWMAR 68 x 7, carbon and ceramic drums.

LEWMAR 60 Pit winches x 2.


Full Cariboni Rams - Outhaul, Vang, Main Cunn, Upper Deflector, Lower Deflector, Forestay , Jibtack, Keel,

Valves tanks - all electronic valves with push buttons in Cockpit on Port / STB.



B&G WTP 3 processor.

6 x mast displays.

GFD 2 x Helm Port /STB

10/10 Display on Runner Winch for Forestay load,

1x GFD Pit,

Raymarine BUS System

Sailor 250, Iridium

Boards x 2: Port / STB

Recovery: Custom outage Keel recovery Ram system with hand pump

Jammers: Spinlock XXC for all loaded Robes, Constrictor to park Halyards in Pit

Engine: Volvo Penta D2-40

Prop: Cariboni Lifting prop


In September 2015 Knierim launched the latest generation racer designed by Ker Design with canting keel and daggerboards.

Cutting-edge technologies were used for the construction of the high-tech racing yacht VARUNA VI, a no-compromise 17 metres long and 4.95 metres wide Ker 56.

“If you intend to win an international top-level regatta at some point in your sailing career, you have to make a decision whether you want a boat that is built for inshore racing or one that is optimised for long distance offshore races”, said owner Jens Kellinghusen about his vision regarding the new-build yacht.

In fact, the team was highly satisfied with the yacht’s predecessor, the 5 foot shorter “Super-TP52” concept, but with regard to sailing the offshore classics – from Fastnet to Sydney Hobart Race, the Trans Atlantic to Trans Pacific competitions – it was necessary to improve the yacht’s reaching speed potential in particular.

The result is a 10% longer and just 7% heavier boat than the Ker 51, carrying an incredible 35% bigger sail area. “While we are talking about tenths of knots when sailing upwind and running downwind, the boat’s speed when reaching is measured in knots”, explains designer Jason Ker.

The canting keel has a pivoting range of 40° to either side and provides a significant part of the yacht’s overall weight of 7.6 tons. The daggerboards’ position was optimised during the building process and moved further aft near the mast.

Thanks to the twin rudders the yacht remains perfectly steerable and controllable at enormous speeds.

VARUNA VI is made of an ultra light sandwich construction using carbon prepregs with a Nomex and Kevlar honeycomb core. Every carbon fibre part was made in-house, like chain plates, daggerboards, rudder stocks, rudders, dodger, winch pods. For all moulds and some bearings Knierim’s 5-axis milling machines delivered precise results.

Also, the technical equipment is state-of-the-art, from grinder drives to hydraulics for the canting keel.

The deck layout is just functional. Eye-catcher on the black deck are the light ceramic coated winches. The cockpit floor is covered with an extremely light weight non-skid foam.

Over all, there is not a gram too much on board.

Below deck are only 14 pipe berths, a 40 hp engine without any insulation, the housing for the retractable propeller, a few pumps, the nav station with some electronics, a control panel for the hydraulics, plus – and this is the only luxurious piece on board – a toilet cabin.

Two weeks after launching the boat, the first and only sea trail in the Baltic Sea put a bright smile on everyone’s face on board. Builders, designer, owner and crew enjoyed the ride in flat to choppy waters near Kiel lighthouse at westerly winds of about 10 knots with gusts up to 16-17 knots. Everything on board worked well, all systems performed as expected.

VARUNA VI accelerated easily to 20+ knots without any serious trimming and with just the main sail, stay sail and heavy genoa. No Gennaker was hoisted due to a not yet delivered bob stay. Also upwind she showed a good speed of around 10 knots. The daggerboards could be easily moved up and down and steering the boat was a pleasure as seen on the helmsman’s smiling face.

Since this phase, the owner and crew have continually pushed and tweaked the sail plan, overall displacement, dagger board positioning and bow strengthening, as the speeds on offer were far more impressive than expected, meaning the boat had to withstand these harsh environments for long periods of time.

IRC: 1.498 TCC

ORC: 399.4 GPH

Lire la suite

Volvo Penta D2-40
Détails supplémentaires sur le nombre de cabines

Sails: All Grand Prix design and build specification.


Light Jib-A North Sails 2015 Forestay set

J2-A North Sails 2015 Forestay set

Heavy Jib North Sails 2015 Forestay set

Heavy Jib Doyle 2018 Forestay set

J 5 - A North Sails 2015 innerstay Furling 3DI

J 5 -B North Sails 2016 3DI

J-0DOYLE 2018 Tack 2# on Bow sprit Top hoist Cable less

J1-A MHDoyle 2017 Furling on Cable Tack 3 on Bow Sprit Furling battens

J2-A MH Doyle 2017 Furling on Cable Furling battens


Delivery Main North Sails 1Reef full hoist pin head 2th Reef 2016

Main -A North Sails 3DI black 2 Reefs

Main -BNorth Sails Big +1,2 m E , (Long Boom ) 2016

Main -CDoyle 2017 3Reefs


Code 0 - A North Sails 3DI Furling cable

Code 0 -B Doyle Cabel less 2017

A1-ANorth Sails SK75

A2- 1 North Sails 2015 Bow Sprit Tack 2

A-2 B North Sails Bow Sprit long Tack 1

A3-ANorth Sails Cuban 2015

A-3BNorth Sails 2016

A3- C Doyle 2018 Furling Cable less

Specialty sails;

FRO-ANorth Sails Cuban 2015


BRO-ANorth Sails 2015 Furling Bow Sprit Tack 2

JT DOYLE 2018 Tack 2# Top hoist

GS -A North Sails 2015 on inner stay for Hoist

SS North Sails 2015 (needs repair)

Storm Jib North Sail Storm Jib Orange 2015 Furling on Cable

Try Sail North Sails 2015

Mainsail bag New Doyle Main Sail bag

Ce Ker 56 a été vu 1323 foi
Courtier / Concessionnaire Informations

Ancasta Ancasta Raceboats

Port Hamble Satchell Lane Hamble
SO31 4QD
United Kingdom
Veuillez mentionner que vous avez vu ce bateau sur TheYachtMarket.

Référence en matière de courtage et de transfert de yachts depuis 1912

En savoir plus


Votre message a été envoyé.

Demander plus de photos

Merci, votre message a été envoyé

Pourquoi ne pas enregistrer les annonces des bateaux similaires qui vous intéressent ?

Nous enverrons les informations suivantes aux vendeurs des bateaux sélectionnés. Votre nom, adresse e-mail, numéro de téléphone (s’il est fourni), votre pays et le ou les bateau(x) qui vous intéresse ou intéressent.

Demander plus d'informations

Changer les unités de mesure

Cette fonctionnalité nécessite que les cookies soient activés sur votre navigateur.

Afficher le prix en:
Afficher les longueurs, largeurs et tirants d'eau en :
Afficher le déplacement ou le poids en :
Afficher la capacité ou le volume en :
Afficher la vitesse en:
Afficher la distance en :