Cabo 35 Express w/Tower for sale

English

New to the market and ready for her second owner is this lovingly maintained example of a 35 Cabo Express sportfishing boat with 4 step Aluminum Tuna Tower accented by gold rod holders. This is a great sportfishing boat capable of getting you offshore or to the islands Powered by a pair of CAT 3126B 450hp engines. She also is equipped with two 12" Simrad EVO 3 dispays with structure scan and radar at the lower helm and one 9" display at the tower station. She is turn key ready and prepared to exceed all offshore performance for her class with her next owner. She's easy to see in Naples, FL.

Specifications

• Length overall (including bow pulpit) 37'6"
• Hull length 34'6"
• Beam 13'
• Draft (Full load to props)  3'
• Transom deadrise 1s
• Displacement (Lt) 20,000 lb
• Fuel 400 gal
• Water 80 gal
• Cabin Headroom 6'11"
• Berths 4

Hull

• Boot striping
• Bottom paint complete preparation - 2 coats epoxy, 2 coats anti-fouling paint, black standard
• Molded fiberglass construction using premium vinylester resins and bi-axial stitched fabric reinforcement. Solid fiberglass bottom construction. Coreconstruction from upper chine to sheer.
• Premium quality molded-in white gelcoat finish
• Stainless steel rub strip on face of white high density PVC rub rail
• Trim tabs, fully recessed

Tower & Top Controls

• Four step tower with hardtop housing radio, spotlight and GPS antennas
• Top control area includes:Steering and Glendinning Controls, Simrad - NSS9 evo3 with same capabilities as Helm units, Richie Compass, Control Storage Box, Bench Seat with Backrest
• Six gold colored rod holders in center and four on legs provide an accent to the anodized aluminum the tower is constructed from
• Dome lights and navigation lights
• Rupp single spreader outriggers with gold spreaders are mounted to the tower

Deck

• Bow chocks, 6" stainless steel
• Bow cleats, 12" stainless steel
• Bow pulpit, integral molded fiberglass
• Custom deck rails, choice of aluminum or highly polished stainless steel (additional charge)
• Molded fiberglass using polyester resin, bi-axial stitched fabric reinforcement and core construction
• Molded-in non-skid surface
• Premium quality molded-in white gelcoat finish
• Recessed custom stainless steel anchor roller assembly
• Springline cleats, 12" stainless steel
• Stern cleats, 12" stainless steel
• Stern hawse pipes, stainless steel
• Windshield washers, (3) wet arms
• Windshield with side vents, heavy duty welded aluminum construction, finished in a white polyurethane paint. Includes weather return on top rail and electrically actuated center vent
• Windshield wipers (3), self parking with heavy duty pantograph arms, with intermittent and separate controls
• Windlass, heavy duty electric 12v, for rope and chain remote from bridge with deck switches

Cockpit

• Aluminum reinforcing plate installed for mounting fighting chair
• Bait prep center, port side, includes sink, rigging board, and tackle storage, fitted with lid, gas spring actuator, full length stainless steel piano hinge and custom latch
• Courtesy lighting under cover boards and helm deck overhang
• Cockpit coaming padding, high density foam, white vinyl covered
• Fishboxes, large capacity, Insulated with macerator pumpout system
• Hatches, lazarette and fishboxes (2), heavy duty with "O" ring seals, drains, gutters and full length, stainless steel piano hinges
• Hose and pistol grip nozzle supplied
• Ice box, starboard side fitted with gasketed lid, gas spring actuator, full length stainless steel piano hinge and custom latch
• Live well/bait tank, 40 gallons, molded into transom Rod-gaff racks, port and stbd.
• Rod holders, (5)
• Self bailing cockpit scuppers
• Transom door with top gate, extreme duty polished stainless hardware
• Washdown, fresh water, port side with quick disconnect
• Washdown, salt water, starboard side with quick disconnect

Helm Deck

• Molded fiberglass helm deck, hydraulically lifted, with cockpit control unit
• Tackle center with 6 drawers to store and organize gear
• Engine access hatch with gas spring
• Helm console, integrally molded
• Helm seat, bench style, adjustable with foot rest
• Safety cabinet with first aid kit and fire extinguisher 
• Storage cabinet at helm
• "I..'.' shaped lounge portside with rod storage below
• Sliding companionway door, opaque white acrylic panel
• Custom outdoor helm deck carpet

Helm Console & Area

• Compass with light, flush mounted
• Complete custom underglass engine instrument panel with audible warning system
• Custom switch panels, stainless steel
• Dual lever engine Teleflex-Hynautic controls (with non-electronic engines)
• Fire and bilge water level alarms, audible
• Stainless steel helm wheel
• Canvas console cover
• Custom Stainless Gauge Panel for CAT Engines
• Custom Stainless Switch Panel
• Glendinning Controls
• 2 Simrad - NSS evo3 Displays with GPS, Sounder, Structure Scan, Wi-Fi & HDMI out
• Platinum Navionics and Insight charts (all 2018)
• Simrad -- HALO-4 Pulse Compression Radar with 4 foot antenna (2018)
• Simrad -Auto Pilot (2018)
• 2 Airmar B164 Transducers, Tilt of 20 degrees through hull, 1000 watt 50/200 hz (2021)
• Icon Radio
• Richie Compass
• Bennet Trim Tab Switches
• Lewmar Windlass Controls
• Windshield Wiper Controls
• Center Vent Window Controls
• Fusion Radio Controls
• Spotlight Controls
• Engine Room Fire Suppression Controls

Helm & Rear Deck Areas

• Storage for Safety Equipment
• Forward and Side Facing Companion Seats 
• AC & Heat Units in Cabin and Helm Areas 
• Ice Maker under Helm Seat
• Freezer Plates in Helm Ice Box
• 40 Gallon Bait Tank with see through Window & LED lights
• Macerators in Insulated Starboard & Port Fish Boxes
• Hydraulic Lift on Helm Deck
• Quick Disconnects for Fresh & Salt Water Washdowns
• Two storage areas with drawers for fishing & other gear
• Sink in Rear Deck Area
• Two Covered Rod Storage Areas

Mechanical

• Metal braided fire-retardant fuel lines
• Bilge, white gel-coated finish
• Bilge pumps, three automatic/manual & one automatic
• Emergency bilge suction valve on one main engine
• Bonding system with transom zinc plate
• Double hose clamps on all hose fittings where possible, stainless steel
• Double constant torque stainless steel clamps on engine exhaust hoses
• Engine alarm system Engine hour meters (2)
• Firextinguishing system, automatic
• Fresh water cooling on main engines
• Fuel filters with water separators on main engines and generator, large capacity
• High water bilge alarms (3)
• Holding tank, 11 gal. polyethylene with monitor, macerator, and dockside discharge
• Water heater, stainless steel 11 gallon, 120V
• Hydraulic helm deck lift system, heavy duty marine grade
• Mufflers fiberglass with backwash surge tube
• Hydraulic engine controls, Teleflex-Hynautic (with non-electric engines)
• Propeller shafts, high strength stainless steel, 1.75 inch diameter, double taper shafts
• Propellers, 3 blade nibral Rudders, high strength bronze
• Stuffing boxes, dripless lip seal type
• Sea cocks, UL approved for marine application, bronze, fitted on all through-hulls below water line
• Bronze high speed water intake scoops with integral sea water strainers
• Hydraulic steering system, Teleflex-Seastar
• Fiberglass fuel tank, fire-retardant vinylester resin

Electrical

• 5 KW freshwater-cooled diesel generator with seawater strainer, remote start and gauge panel, water muffler, safety shut down system
• Custom AC electrical distribution panel with line voltage and load meter, reverse polarity light
• Custom DC electrical distribution panel with battery voltage and load meter
• Circuit breaker protection throughout
• Battery paralleling solenoid with switch at helm
• Battery on/off switches, vapor proof
• Batteries (5)
• Bonded electrical system
• Converter/battery charger, 70 amp automatic with thermal cut out
• Engine room llghting, 12V halogen
• Horn supplied, uninstalled, for tower installation 
• Navigation lights, International, shipped uninstalled for future mounting on arch, hardtop or tower
• 50' shore cords, 30 amp shore power

Main Cabin

• Access hatch to bilge
• Designer interiors, high quality selection available 
• Lighting - recessed halogen (6)
• "C' shaped lounge converts to upper and lower sleeping berths
• Interior wood, teak, superbly joined and finished in satin varnish
• Opening ports (3)
• Positive latches used on cabinet doors and drawers
• Removable deep pile carpet
• Selection of fine quality fabrics and coverings throughout
• 110 volt duplex outlet/GFI protected
• Air conditioning/heat including extra shore power, 10,000 BTU capacity
• Access to anchor rope locker
• Diagonal double bed portside with 5" mattress, coverlets Foredeck hatch with retractable shade
• Hanging locker, starboard side
• Positive latches used on cabinet doors and drawers 
• Storage compartments and large drawers below bed 
• Upholstered dressing seat
• 110 volt duplex outlet/GFI protected
• Port and starboard rod storage locker for up to 8 rods with #50 wide reels
• Flat screen T.V. 15" Stereo AM/FM/CD/DVD
• Recessed halogen lights (4)

Galley

• Ceramic cook top, one burner, recessed with Corian cover Corian counter top with custom Corian sea rails
• Counter top lighting, recessed halogen (3)
• Microwave/convection oven
• Positive latches used on cabinet doors and drawers
• Sink, deep single, polished stainless steel, molded in
• Storage compartments and drawers throughout
• 110 volt duplex outlet/GFI protected
• Side by side refrigerator/freezer, AC/DC

Cabin & Galley Areas

• Teak & Holley Wood Floors & Finishes
• Ceramic cook top, sink and Corian Counter top
• Microwave/convection oven
• Side by Side Refrigerator/Freezer AC/DC
• 32" Samsung Smart TV/CD Player (2021)
• Fusion MS-RA70NSX Radio and wireless remotes (2021)
• Access to Anchor Rope & Chain
• Diagonal Double Bed
• Seating Area converts to upper & lower sleeping berths
• AC and Heating

Head Compartment

• Corian counter top, custom
• King starboard framed mirror
• Custom vanity
• Head, Sealand Vacuflush electric
• 12 volt recessed halogen lighting
• Positive latches used on cabinet doors and drawers
• Opening port
• Toiletry storage cabinet, Corian framed with sliding mirror doors
• 110 volt duplex outlet/GFI protected
• Verticle rod storage rack in head for 3 rods
• Separate stall shower with automatic shower sump pump

Engine

• Air Inlet System: air cleaner with closed crankcase fumes disposal system
• Charging System: belt-driven charging alternator and mounting (12 volt, 51 ampere)
• Control System: electronic governor with Electronic Control Module (ECMl, throttle position sensor, engine-mounted 40-pin dedicated customer connector, SAEJ1939)
• Cooling System: sea water aftercooler with condensate drain valve, gear-driven auxiliary sea water pump and auxiliary sea water lines, engine-mounted heat exchanger with removable copper-nickel tube bundle, expansion tank, thermostat and housing, engine oil cooler, transmission oil cooler
• Exhaust System: fumes disposal routed to turbocharger inlet
• Flywheel & Flywheel Housing: SAE No. 3 flywheel (126 teeth) and SAE No. 3 flywheel housing
• Fuel System: Hydraulically actuated, electronically controlled Unit Injector fuel system, LH or RH service fuel filter, fuel transfer pump
• Lube System: top mounted crankcase breather, front center service oil filter, LH or RH service oil filler and oil level gauge, oil pan, LH or RH service oil pan drain, gear-driven oil pump
• Protection System: electronic overspeed protection
• Starting System: rear-facing electric starting motor (12V}, air inlet heater

Safety Equipment

• Anchor
• 20' chain
• 250' rode
• Life jackets
• Throwable P.F.D.Fire extinguisher
• Docklines
• Fenders
• Distress signaling device
• Flashlight
• Emergency horn
• First aid kit