ADRIA SAIL Grand Soleil 80 CL for sale

Fano

$4,149,251USD
Listed price €3,500,000 EUR

General information
Make/model
ADRIA SAIL Grand Soleil 80 CL
Category
Used sail boat for sale
Price
$4,149,251 USD | Listed price €3,500,000 EUR
Name of boat
ESSENTIA
Year
2019
Length overall
86'3"
Beam
21'3"
Location
Fano

About this ADRIA SAIL Grand Soleil 80 CL

English

A fabulous new listing at the forefront of technology and design - the Grand Soleil 80 CL was custom built to be a true cruiser/racer. Beautifully equipped and with a very high specification - she is the perfect all-rounder.

Construction

Identification number (WIN): ITALDLGS801A919 (on the upper part of the transom on starboard side)

RCD Status: The yacht conforms with the essential safety requirements of Directive 94/25EC or RCDII (2013/53/EU as appropriate (Recreational Craft Directive) and is categorised A – “Ocean”

Hull, Deck & Superstructure Construction:

  • Construction material: Carbon fibers and epoxy resin.
  • Displacement (light condition): 33,300kg / 73,414lb.
  • Maximum recommended load: 5,000kg / 11,023lb.
  • LOD: Hull length: 78’8” / 23.99m.
  • Maximum height (air draft): nearly 121’5” / 37m.
  • International VC Tar2 – antifouling primer.
  • International VC 17m Extra-Graphite – antifouling.
  • Awlgrip Noir Granit Extra Metallic, code nr. E2030 – hull paint.

Keel & Rudder:

  • Rudder blade is made of PVC foam, carbon fiber and epoxy resin; the rudder stock is made of carbon fiber and epoxy resin.
  • The deepest point of the blade is at 3,5 meters from the waterline.
  • Rudder is fixed on two self-aligning bearings
  • Steering system consists in several components. Among them the main ones are: an aluminum quadrant fixed on the rudder stock, a self-aligning aluminum bearing fixed to the deck, a self-aligning aluminum bearing fixed to the hull and two pedestals made in fiberglass and two carbon wheels
  • Two line systems of steel cables, chains and pulleys connect the quadrant to the wheels hubs.
  • As these two line systems are independent, they work one as a reserve of the other and it is not necessary to provide an emergency tiller for the rudder.
  • A hydraulic actuator is connected to the rudder quadrant.
  • The keel includes a blade and a bulb bolted to the blade.
  • The blade is made in high strength steel Weldox 700.
  • The bulb is made in lead.

Machinery

Engine & Gearboxes:

  • The main engine (Volvo Penta D4-260, 191 kW @ 3500 rpm) is cooled by a primary (coolant) and a secondary (sea water) system. Heat transfer from the coolant to the sea water is through a heat exchanger; a pump driven by the same engine sucks the sea water directly from the beam of the salt water main manifold.
  • Also, the sea water in the water-oil heat exchanger cools the lubrication oil of the engine.
  • The engine and the gearbox (ZF 63 IVE, 1,99:1 forward, 2,03:1 back, 12°) are mounted on vibration damping supports with the aim of reducing the propagation of vibrations to the hull to a minimum.
  • A sensor is installed on the main engine to detect the temperature of the exhaust gases (San Giorgio SEIN, item nr. TTR 40450).

Propulsion & Steering:

  • The boat is equipped with a propulsion system that consists of a diesel engine connected to a reduction/reversing unit (V-drive type) that, in turn, transmits power to a three feathering blade propeller
  • The propulsion system is entirely contained in the engine room situated at the center of the boat.
  • The propeller (Maxprop Easy 111, 3 blades, diameter 28’’, adjustable pitch) has feathering blades. It works completely automatically: it takes the pitch when the drive shaft is rotated to travel forward or backwards; instead, the propeller feathers when engine is off, starting from the position to travel forward, with the propeller shaft locked.
  • Bow thruster: Quick BTR2524024, 10 kW, 24 V DC.
  • Stern thruster: Quick BTR2524024, 10 kW, 24 V DC.
  • On each side of the cockpit there’s a steering pedestal with one carbon wheel each one (Solimar America’s Cup, diameter 1200 mm, 5 spokes.

Other Mechanical Equipment:

  • The exhaust gas system of the main engine and of the generator is of the wet type; the exhaust gases are mixed with the main engine and generator cooling water at: the exit of the propulsion engine turbine compressor; the outlet of the generator raw water pump.
  • The injected water reduces exhaust gases temperature, volume and pressure.
  • This fact causes a substantial reduction of gas velocity and then a considerable reduction of noise emission.
  • Also, it prevents exhaust gas system damage while the water vapour mixed with the exhaust gases avoids the emission of unpleasant smell.
  • The mixture of exhaust gases and water vapour is conducted before inside a muffler to reduced further the noise.
  • After, it is conducted inside a water separator to separate the gases from the water; this reduces the back
  • pressure dramatically and stops the sploshing noise.
  • Discharge of the water is through two dedicated outboard discharge seacocks located under the galley floorboard (under the water line).
  • Discharge of the exhaust gases is through the outboard discharge seacocks located on the aft port boat end (just above the water line).
  • The exhaust gas plant is made of flexible reinforced PVC hoses with bronze valves; two stainless steel clamps are used at each end of all the hose connections.

Electrical Systems

Voltage Systems:

  • There are three electrical system on the boat: one 24 V DC, one 12 V DC, one 220 V AC.
  • 220 V AC and 24 V DC supply all the appliances and some of them are supplied by both systems; the 12 V DC is just for the main engine and generator starters.
  • The 12 V DC system includes: two batteries, located under the captain cabin floorboard (Mastervolt AGM 12/130, 12 V DC, 120 Ah); a 24 V DC/12 V DC converter, inside the captain cabin wardrobe (Mastervolt Magic 24/12-20, 300 W).
  • The 24 V DC includes: six lithium-ion type batteries, located under the dinette floorboard (Mastervolt MLi Ultra 24/5000, 24 V DC, 180 Ah).
  • The 220 V AC is supplied by: the inverter (Mastervolt Sine Ultra 24/4000, 4000 W); the generator (Onan MDKDR, 17,5 kW, 220 V AC @ 50 Hz); the shore power.

Battery Banks:

  • 12 V DC system batteries: 2 x Mastervolt AGM 12/130, 12 V DC, 120 Ah.
  • 12 V DC system battery charger: Mastervolt ChargeMaster 12/50-3, 50 A.
  • 12 V DC system converter: Mastervolt Magic 24/12-20, 300 W.
  • 24 V DC system batteries: 6 x Mastervolt MLi Ultra 24/5000, 24 V DC, 180 Ah.
  • 24 V DC system battery chargers: 2 x Mastervolt ChargeMaster 24/100-3, 10 A.
  • 24 V DC system main engine alternator: Mastervolt Alpha Pro 24/150 MB, 150 A.
  • 24 V DC system inverter: Mastervolt Sine Ultra 24/4000, 4000 W.
  • The locker inside which the batteries are located is watertight and is protected by a special fire-fighting system (Polytechno Engineering Aerpro, item nr. FP80HS) which is activated automatically as soon as the temperature reaches a certain value.

Battery Chargers:

  • A battery charger, inside the engine room (Mastervolt ChargeMaster 12/50-3, 50 A).
  • Two battery chargers, located under the dinette sofa furniture, one at starboard side, one at port side
  • (Mastervolt ChargeMaster 24/100-3, 10 A)
  • The boat is equipped with a battery management system that allows you to manage the electrical system on board by means of a remote control.
  • By pressing the ON button of the remote control, the electrical system powers up with car functionality and at the same time authorizes you as the user of the boat.
  • When the electrical system is on, just press a button to turn the engine on or off.

Alternators:

  • An alternator installed on the main engine (Mastervolt Alpha Pro 24/150 MB, 150 A).
  • An additional alternator is installed on the main engine (Volvo Penta Generator, 24 V DC, 80 A, item nr. 3840183).

Generator:

  • The onboard genset is an Onan MDKDR, 17,5 kW, 220 V AC @ 50 Hz.
  • Switch off the generator pushing the stop button on the touch screen of the navigation system.
  • In order to avoid flooding the generator motor, a siphon-break valve (Vetus ASD38V) has been installed on the sea water cooling circuit.
  • The same precaution was adopted for the main engine.
  • Both siphon-break valves are located inside the engine room.

Other Electrical:

  • A 24 V DC/230 V AC inverter, close to starboard battery charger (Mastervolt Sine Ultra 24/4000,
  • 4000 W).

Plumbing Systems

Fresh Water & Water Heating System:

  • The water heater (Quick BX 80 12 S, 220 V AC) is located under the central part of the dinette floorboard
  • Boiler is connected to the main engine cooling system; when the engine is running, the fluid inside the engine cooling system heats up the fresh water inside the boiler by means of a heating coil (remote heating system).
  • Dockside water supply is through a fitting located in the lazaretto, on the starboard boat side

Watermaker:

  • The water-maker (Schenker, Modular 150 Digital, 220 V AC) is made up various parts: a feed (low pressure) pump, that includes a 5 micron cartridge filter, located under the dinette floorboard, close to entrance stairs.

Bilge Pumps:

  • Centralized bilge pump: Gianneschi ACB 331/1, 24 V DC.
  • Hand bilge pump: Jabsco Amazon Universal 29270-000 in the cockpit, aft of the left secondary winch.

Tankage

  • Hydraulic Oil tank: 15 liters (3 gallons).

Fuel:

  • Fuel tank (diesel): 2 x 725 liters (159 gallons).
  • Day fuel tank (diesel): 150 liters (33 gallons).
  • Fuel day tank pump: Gianneschi CP 20/A2, 24 V DC.
  • Fuel emergency hand pump: Gianneschi Excelsior 1 B.
  • The fuel plant permits loading, transfer and fuel supply to the propulsion engine and the onboard genset.
  • The plant is made of flexible strengthened rubber hose (CE approved) with brass valves.
  • Fuel fills the tanks gravity from filling intakes located on the gunwale, amidships, one per side. Close to the filling intakes, there are the plugs of the tank secondary vents.

Fresh water:

  • Fresh water tank: 2 x 315 (69 gallons) + 2 x 465 liters (102 gallons).

Grey/Blackwater holding tanks:

  • Black water tank: 340 liters.
  • Gray water tank: 340 liters.

Gas:

  • The gas system includes two butane gas cylinders located inside the lazaretto, port boat side.
  • A vent line joints the lowest point of this locker to overboard, above the waterline, through the scupper seacock located port boat side.
  • Only one of the two gas cylinders is connected to the system; the other is used for stock purpose.
  • The working gas cylinder is equipped with an on/off valve and a gas pressure regulator
  • Another lever operated valve is located at the gas cooker.
  • The plant is made of copper piping and flexible strengthened rubber hose with brass valves.

Navigation Equipment

On the top of the starboard helm pedestal, there is a dashboard that houses:

  • 1 compass (Osculati Ritchie Voyager, item nr. 25.082.11, 12 V DC).
  • 10 buttons to control: genoa starboard car puller (forward/aft); genoa port car puller (forward/aft); main outhaul (tight/ease); vang (tight/ease); jib halyard/barber (up/down).
  • 1 multifunction display (NKE).
  • 1 chartplotter with integrated fishfinder (Garmin GPSMAP 7410xsv J1939, 10”, 12 V DC).
  • 2 buttons to activate the hydraulic system (on/off).
  • 10 buttons to control: cruise forestay tensioner (tight/ease); race forestay tensioner (tight/ease); jib furler (in/out); innerstay tensioner (tight/ease); transom door rams (up/down).
  • 1 multi instrument (Volvo Penta).
  • 1 EVC E-Key (Volvo Penta).
  • 1 bow and stern thruster command (Quick TCD 1044).
  • 1 throttle lever (Volvo Penta).
  • 1 horn switch.
  • 1 VHF socket.

On the top of the portside helm pedestal, there is a dashboard that houses:

  • 1 compass (Osculati Ritchie Voyager, item nr. 25.082.11, 12 V DC).
  • 10 buttons to control: genoa starboard car puller (forward/aft); genoa port car puller (forward/aft); main outhaul (tight/ease); vang (tight/ease); jib halyard/barber (up/down).
  • 1 multifunction display (NKE).
  • 1 chartplotter with integrated fishfinder (Garmin GPSMAP 7410xsv J1939, 10”, 12 V DC).
  • 2 buttons to activate the hydraulic system (on/off).
  • 10 buttons to control: cruise forestay tensioner (tight/ease); race forestay tensioner (tight/ease); jib furler (in/out); innerstay tensioner (tight/ease); transom door rams (up/down).
  • 1 GPS antenna (Garmin) and 1 mushroom antenna (NKE).
  • 1 horn switch.

Hydraulic System

  • Race forestay tensioner, located inside the chain locker – Bamar STD-60, stroke 200mm.
  • Cruise forestay tensioner and furler (electric), located inside the chain locker – Bamar STD-76, stroke 150mm + Bamar EJF2C.
  • Innerstay tensioner, located inside the sail locker – Bamar STD-30, stroke 500mm.
  • Starboard car puller, located midship under the deck – Bamar STD-17, stroke 850mm.
  • Port car puller, located midship under the deck - Bamar STD-17, stroke 850mm.
  • Jib halyard/jib barber tensioner, installed outside the mast – Bamar STD-17, stroke 350mm.
  • Vang – Bamar STD-90, stroke 500 mm, PCLC (length pin to pin cylinder closed) 3000mm.
  • Outhaul ram, installed inside the boom – Bamar STD-17, stroke 350mm.
  • Transom door rams, located inside the lazaretto – Bamar BSCP 800, stroke 800mm.
  • Two electric pumps, located inside the starboard side of the lazaretto – Tecno3 CFR, item nr. CA151.P0049, 24 V DC;
  • Hand backup pump, located on the starboard side of the cockpit, in front of the pedestal – Tecno3/Bamar BHP Multifunction hydraulic panel single velocity.
  • Tank, located inside the starboard side of the lazaretto – Tecno3, 11.5 liters, custom dimensions, stainless steel.
  • Forward manifold, 3 functions, located inside the sail locker – Tecno3 MF1, custom design.
  • Aftward manifold, 1 function, located inside the lazaretto, on starboard boat side – Tecno3 MF3, custom design.
  • Midships manifold, 5 functions, located under the port guest cabin floorboard – Tecno3 MF2, custom design.
  • Distribution manifold, located inside the lazaretto, on starboard boat side – Tecno3 EVC, custom design.
  • The oil can be pumped by one of this two systems at a time: the two electric pumps; the hand pump (only vang, outhaul, forestay and innerstay).
  • Finally, the hydraulic system includes a filter and a PLC unit that controls the system (Tecno3 PLC, custom design). Both are inside the starboard side of the lazzaretto.

Domestic Equipment

  • Washer-dryer machine: Miele WTZH 730 WPM, 220 V AC. Located in crew bathroom.

Galley:

  • Dish-washer: Miele G 6730 SC, 220 V AC
  • Steam combination owen: Miele DGC 6800X, 220 V AC.
  • Stove blower: Osculati 16.107.06, 750 mc/h, 24 V DC.
  • Hob with two gas burners: Miele CS 1012-1 G, 220 V AC.
  • Hob with two induction-heated cooking zones: Miele CS 1212-1 I, 220 V AC.
  • Fridge: Veco Frigoboat, item nr. G5105124, 260 liters (69 US gal), 24 V DC/220 V AC.
  • Freezer: Veco Frigoboat, item nr. G66095, 200 liters (53 US gal), 24 V DC/220 V AC.
  • Coffee machine: Nespresso Inissia, 220 V AC.

Dinette:

  • Ice-maker: Indel Webasto Isotherm IceDrink Clear, 4 liters, 220 V AC.
  • Wine cabinet: Eurocave V-059V2 C, 220 V AC.

Heads/Showers:

  • Toilets: 5 x Osculati Tecma Silence Plus 2G, item nr. 50.227.01, 24 V DC.

Heating & Ventilation:

  • The Airconditioning  (Veco Climma DC65, 65000 Btu/h in cool mode, 70000 Btu/h in heat mode, 220 V AC) is located inside the engine room above the genset; it includes a variable speed compressor by means of an inverter that allows to adapt the power of the machine according to the actual power demand on board.
  • Each cabin is equipped with a digital control panel (Veco Climma MK2) for fain-coil control and a thermostat for automatic temperature regulation.

Entertainment:

  • The speakers of the audio system (Fusion Signature Series) are located aft of the benches in the cockpit.

Accommodation

Owner bathroom:

  • Owner bathroom Toilet: Tecma Silence Plus 2G, 24 V DC.

Owner cabin:

  • Off centre double berth with access on both sides.
  • Hull wondows giving plenty of natural light.
  • Full height storage
  • Full hull width heads, with separate shower unit.
  • Excellent use of space, with high quality furnishings used throughout.
  • Owner cabin Fan-coil: Veco Climma MEVA9J, 9000 Btu/h, 220 V AC.

Port guest cabin and bathroom:

  • Port guest cabin Fan-coil: Veco Climma MFC6, 6000 Btu/h, 220 V AC.
  • Port guest bathroom Toilet: Tecma Silence Plus 2G, 24 V DC.
  • Double berth, with storage underneath
  • Heads unit with shower close to centerline to maximize height.

Starboard guest cabin and bathroom:

  • Starboard guest cabin Fan-coil: Veco Climma MFC4, 4000 Btu/h, 220 V AC.
  • Starboard guest bathroom Toilet: Tecma Silence Plus 2G, 24 V DC.
  • Single berth with own heads unit. Overhead ventilation and light.

Starboard aft guest cabin and bathroom:

  • Large double berth
  • Large hull window at berth height giving plenty of natural light.
  • Full height storage unit with seating
  • Large heads compartment with separate shower cubicle.

Saloon:

  • Saloon seating all round, with full height table on Port side and lower coffee table on starboard side.
  • Skylights on centerline, forward and side windows on coachroof and large hull windows on both sides give a large amount of natural light and also 180 degree vision.
  • On the port side aft the bulkhead has room for a large television unit.
  • Subtle lighting is installed around the furnishing and gives a very comfortable and relaxed atmosphere.

Galley:

  • The galley is located aft of the saloon on the port side accessed from the saloon.
  • The galley has a large hull window and natural light.
  • Also has access to the crew cabin and nav. station giving a large and open plan feel to crew quarters.

Engine room:

  • The engine room a watertight space separate from the main environment; it contains the main engine, the onboard generator, the fuel day tank, the main engine silencer and exhaust gas/water separator, the genset silencer and exhaust gas/water separator and some components of the other systems.
  • It is possible to access the engine room by means of: a side door, from the galley; a side access, from the starboard corridor (the access is hidden inside the furniture located in the corridor) and also by lifting the access staircase to the saloon.

Crew area:

  • The Crew cabin has bunk berths and access to the galley and nav station, with separate heads.
  • Airconditioning throughout.

Lazarette:

  • The lazarette is divided into three parts: a starboard locker, one on the left and a central one that functions as a garage for the tender.
  • It is a watertight space separate from the main environment; also, the central garage is sealed towards the outside.
  • It can be accessed both from the cockpit hatch and from the transom door; it is a large space with plenty of storage for bulky items.
  • In addition to the tender, the lazarette contains some system components and the steering system.

Cockpit:

  • The hydraulic system back-up control panel.
  • The electric system shore plug (aft starboard side).
  • The fresh water system shore plug (aft port side).
  • In the central part of the cockpit, between the two side benches, there is a table.
  • Two movable side shelves allow to increase the table support surface when rotated of ninety degrees.

Deck Equipment

Rig:

  • The boat is equipped with a new, 2020 Axxon Composites carbon fiber mast, in a medium modulus rather than a high modulus as per the original mast. The new mast is more than capable to withstand all loads from cruising and racing. Three spreaders order (22.2°, 22.2° and 21.9°) and a carbon fiber V-boom.
  • There are two different types of forestay: one rod (for cruising), one in carbon fiber (for racing).
  • Shrouds and backstay are in carbon fiber. There are two types of backstay, one for cruising, one (double) for racing.
  • Backstay tension with secondary winches.
  • Race forestay tensioner: Bamar STD-60, stroke 200mm.
  • Cruise forestay tensioner and furler: Bamar STD-76, stroke 150mm + Bamar EJF2C.
  • Aft of the cockpit, between the two steering pedestals, there is the mainsheet island and, in front of it, the recessed mainsheet traveler.
  • The mainsheet island is equipped with the mainsheet electric winch (Harken 1111.3 STR; a pulley system to divert the mainsheet; two mainsheet winch buttons; two mainsheet line driver buttons.
  • In addition to this, on the deck are installed other six electric winches.
  • Two winches are installed on the sides of the mast (Harken 990.3 ST).
  • They are used for halyards and reefing.
  • Two winches are located on cockpit sides forward of the helms (Harken 1111.3 STR )
  • They are used for Jib, Gennaker and Code 0 sheets
  • Ahead of the deckhouse there’s the mast collar, the halyard jammers (two on each side) and the halyard organizers (six blocks on each side).

Winches:

  • Mainsheet winch: Harken 1111.3 STR CAC EL24V HOR, 24 V DC.
  • Halyard and utility winches at mast base: 2 x Harken 990.3 ST.
  • Jib, Gennaker and Code 0 sheet winches: 2 x Harken 1111.3 STR.
  • Backstay winches: 2 x Harken 990.3 ST.

Sails:

  • Upwind Sail area (100%): 365 m2.

General:

  • The chain locker is a non-watertight locker; it self-drains from two holes on side of the hull; contains a fresh water tanks vent; the furler and the windlass electric control units.
  • The sail locker is a watertight space separate from the chain locker
  • Guardwires run along all the perimeter of the boat deck supported by stanchions.
  • At midship, they are interrupted by two gates, one for each side. Likewise, a handrail closes the cockpit aft.
  • Both side gates can be opened with pelican closures.
  • The transom of the boat can be opened to access at the tender garage, load/unload the tender and to use the transom door itself as swimming platform.
  • Two hydraulic rams (Bamar BSCP 800, stroke 800 mm) move the transom door; to activate them, use the related buttons on the starboard and port pedestals.
  • The swimming platform is equipped with two ladders, one for bathing and one to going up/down to the deck.
  • The latter is retractable and hand-operated while the first must be positioned when required.
  • The ladder for the bathing has two handrails.
  • Passarelle is 3 meters long, 46 centimeters wide and weighs 17 kilos.
  • The socket for its fastening is located at the mid-width of the stern.
  • When not in use, the it is stored installed under the lazarette central hatch.

Anchoring & Mooring Equipment:

  • An electric vertical windlass (Quick Dave DV5 2300 Y, 24 V DC) inside chain locker with remote controller and chain counter (Quick CHC 100 2M, 24 V DC).
  • An anchor launching system inside the bowsprit.
  • 110 m of calibrated and hot dip galvanized chain, gauge 12 mm.
  • A 50 kg Delta anchor
  • Two pop-up cleats (Seasmart B320X), bow
  • Two pop-up cleats (Seasmart B320X), aft, made in AISI 316 stainless steel, with a working load of 9000 kg.
  • Two pop-up cleats (Seasmart B240X), at midship, made in AISI 316 stainless steel, with a working load of 3000 kg.

Covers, Canvas & Cushions:

  • The two sprayhood arches are stowed inside a recess on the deck.
  • The aft arch includes the recess cover.
  • For the bimini, however, there is a removable double-arch frame that, when not in use, is folded and stowed in one of the two side peaks of the lazaretto.

Tender & Outboard:

  • Williams Turbojet 385.
  • A winch (Quick THG 500, 24 V DC) is installed inside the garage, near its forward bulkhead, for the tender's stowage.

Safety Equipment:

  • On the stern rail is fixed a bag that containing a ladder for emergency re-boarding
  • Two life-rafts Arimar Oceanus C, item nr. 111.008IT, ABS container, for 8 persons each one, are stored inside two cockpit lockers, one on the starboard side, one on the port side of the boat.
  • Some safety hooking points are installed on the deck: two on the gunwale, one for side, aft of the shroud chain-plates; two on the deck-house, one for side, close the vang.

Read more

Propulsion
Fuel
Diesel
Fuel capacity
423 gallons (U.S.)
Accommodation
Number of berths
9
Drinking water capacity
412 gallons (U.S.)
Broker/Dealer Information

Berthon International

The Shipyard
Lymington
SO41 3YL
United Kingdom
Please mention that you saw this boat on TheYachtMarket.
XXXX XXX XXX
ABYA Logo
ABYA YACHT BROKER

Setting the standards in yacht broking and conveyancing since 1912

Find out more

Thank you

Your message has been sent.

Ask for more photos

Email to a friend

Report this boat

Thank you, your message has been sent

Why not register your interest in these similar boats?

We will send the following details to the sellers of the selected boats: Your name, email address, phone number (if provided). your country and which boat(s) you are interested in.

Request More Information

Change units of measure

This feature requires cookies to be enabled on your browser.

Show price in:
Show lengths, beam and draft in:
Show displacement or weight in:
Show capacity or volume in:
Show speed in:
Show distance in: