Baltic Baltic 50 for sale

Stockholm, Sweden, Scandinavia

$659,355USD
Listed price €600,000 EUR

Tax Paid / Included

General information
Make/model
Baltic Baltic 50
Category
Used sail boat for sale
Price
$659,355 USD | Listed price €600,000 EUR
Tax / VAT status
Paid / Included
Name of boat
SPIRIT
Year
2003
Length overall
50'0"
Length waterline
43'7"
Beam
14'2"
Draft
9'10"
Displacement
11.79 tons (U.S.)
Keel
Fin Keel
Location
Stockholm, Sweden, Scandinavia

About this Baltic Baltic 50

English

SPIRIT is Baltic 50, number 08 and was delivered new to her current owner in 2003.

Mostly she has been sailed in Swedish waters and stored ashore inside each winter.

In 2009 the yacht was sailed to the Caribbean. After the season there she was shipped back, via the UK where she was imported and VAT paid. She returned on home to Sweden after.

In the winter of 2011-12 the yacht was placed with Baltic Yachts the builder in Finland for a full refit.

The brief for the re-fit was “rebuild Spirit to how you would have built her today”. The owners view was that she was his "forever boat" and he wanted her in top shape and fully upgraded. So much so that the following winter he again returned the yacht to Baltic for further improvements.

Total cost of the refit including material exceeded €460.000. Close to 4.000 hours. Further details in the specifications below.

Since autumn 2013 SPIRIT has been stored indoors in a private, heated storage.

This is a very special yacht in outstanding condition. 

Full Specification

HULL & DECK

Hull Number: 008

Hull/Keel Type: Fin keel, (reverse) L shape with bulb

Hull Colour/Finish: Silver metallic

Hull Material: Composite construction, Epoxy / Carbon (full details below)

Deck: Carbon/teak with custom made flush hatches

Keel: Stainless steel fin with lead bulb.

 

SPEED & RANGE

Max Speed: 10,5 knots

Cruising Speed: 8 knots

Range: c. 650 Nm @7,5 knots/2100 RPM

Fuel Consumption: c. 4 litres/hour @ 7,5 knots/2100 RPM

Note of owner: Figures above to the best of my memory. Spirit has a relatively large diesel tank, 360 litres, for her weight and is very easily driven, especially I calm conditions. We have never taken any extra diesel (in jerry cans) and didn’t do that during ARC. Arrived in Saint Lucia with more than half tank.

 

TANK CAPACITIES

Fuel: 360 litres in Stainless steel tank

Fresh Water: 225 + 50 litres in Stainless steel tanks

Note: Water is divided into two tanks that are connected in order to meet racing regulations. The small tank serves as spare water.                                                                     

Black Water: approx. 50 litres, stainless steel tank connected to aft head only with gravity disposal into the sea and deck suction. Tank is located forward of aft head under port sofa in saloon.

Grey Water:  Shower water and waste from hand washbasins drains into sump under floorboards at each head. Pumps out with electrical pump.

Galley wastewater drains direct overboard with a pump.

 

CONSTRUCTION:

Note: Reference here is made to the standard Baltic Yachts build specification of the time. Full copy available on request.

 

HULL

The hull is constructed with epoxy using vacuum bagging laminating technique. Laminate to be in Carbon fibre and epoxy resin (Ampreg 22), and Corecell core.

Some local reinforcement to be in Aramid and glass.

All skins laid up in one bagging of all plies, with the last fibre ply being followed by a peel ply. Laminates to be post cured at 50 degrees C for 12 hours.  Woven and biax laps to be 50mm.

 

FINISHING

Hull exterior: US Paint #545 Epoxy Primer on entire hull Topsides:  Painted in refit 2012 in silver metallic Awlgrip

No “Baltic” stripes in the aft end of the topsides. Water line black Bottom: Three coats (minimum) of Epoxy primer prior to antifouling paint. Antifouling International Premium White and Black mixed (to give grey finish). Hull surface interior: The entire hull interior skin and all non-visible FRP surfaces shall be finished smooth to eliminate any protruding fibre strands and to eliminate any voids or pits. Then, the hull interior skin and all visible and non-visible FRP surfaces shall be painted white.

 

STRUCTURAL BULKHEADS

Structural bulkheads Corecell foam and Carbon laminate panels, prefabricated on a laminating table, under vacuum. Bulkheads laminated to the hull. Visible surfaces to be teak faced. Thin teak veneer applied by vacuum bagging. Bulkhead and tapping laminates to be post cured at 50 degree Celsius for 12 Hour.

 

CHAIN PLATES

Chain plates in FRP, V-strap type using Kevlar and Epoxy.

Pad eye on the stem head.

 

ENGINE BEDS

Standard Volvo Penta engine bed installed so as to be continuous with keel frame in FRP, so that the sump under the engine will serve as an oil drip pan. Complete drainage of pan shall be provided for by means of a small hand sump pump and swabbing.

 

BALLAST

Fixed ballast in keel totalling 4.083 kg.

Keel fin in stainless steel. Keel bulb to be cast in 4 - 6 % antimony lead.

Stainless steel mounting bolts.

 

RUDDER AND RUDDER STOCK

The rudderpost in CRP. The blade also CRP and with a foam core.

Self-aligning JP3 bearings (or equivalent) for upper and lower bearings.

 

DECK

DECK GENERAL CONSTRUCTION

Deck built out of a female mould. Fibre orientation and number of plies will vary over the deck. The laminates vacuum bagged to achieve the best possible strength and resin ratios. The deck constructed primarily of Carbon fibre and epoxy resin (Ampreg 22), and Corecell core. The inside and outside skins reinforced in way of deck gear with C- plates.

One foam and Carbon deck beam each side under Genoa tracks.

High-density core used under the runner tangs, winches, at the mast partners, and the upper rudder bearing.

Compression tubes will be inserted, where necessary, in way of bolts under all deck hardware.

 

DECK FINISHING Teak deck (incl. cockpit coamings). Teak over whole cabin top, including bridge deck and surfaces underneath sprayhood.

Other deck areas and coaming painted in Off White.

Teak toe-rail.

 

DECK EQUIPMENT & FITTINGS

Sliding companionway hatch with two washboards.

Marten Marine flush deck hatches.

Cockpit locker starboard side.

Lewmar opening portlights.

 

STEERING

Twin wheel steering system.

Steering wheel height 120-125 cm.

Steering wheels in carbon by Exit with elk hide covering (renewed 2012). Individual steering lines for both wheels. Custom steering pedestals in cockpit. Wheel diameter - 1050 mm Cable size - 10 mm Vectran Quadrant - JP3 Stops - 2 Sheaves - 100 mm dia Harken

One aluminium emergency tiller, fits head of rudderpost, stows in cockpit locker.

Helmsman foot braces fit each side.

 

ANCHORING

Windlass: Lewmar electric 24v, mounted under deck forward in sail locker.

Foot switches and cable remote.

Stainless Bruce anchor with 60 meters stainless chain

 

Winches: (type, make, speed, function etc)

2*Harken 980 Racing 3-speed Primaries 2*Harken 65 Electrical Racing Secondaries / Main sheet 1*Harken 48 Electrical - halyards 1*Harken 48 Racing - halyards

 

Harken mainsheet X-Haul system, mounted on white carbon support beam.

Single jib sheet track system.

Halyards, reef lines etc. led under cabin top.

Pulpit (top part opening), pushpit, stanchions and double lifelines.

Swim ladder on transom.

 

INTERIOR & ACCOMMODATION

SPIRIT has a semi-custom interior with joinery work to the highest standard.

All visible joinery is teak faced with solid Teak or laminated teak frames and capping. The structure of the teak has a straight pattern, quarter cut.

The joinery is varnished throughout. Visible surfaces are varnished, and hand rubbed to obtain a satin type of surface.

She has a slightly sleeker interior style than the traditional Baltic interior style.

The interior joinery is Carbon laminate Divinycell cored panels with thin veneers.

Plywood, when used, is marine-grade. The trim is of solid wood.

The heads are all composite construction with grey Corian counter tops.

Teak gratings in head.

Fittings are stainless and polished aluminium.

Doors are provided with retaining hooks and swing stops where sensitive.

Kick plates on steps and chafing pieces on sills are provided.

Canvas lee cloths provided for berths in owners stateroom and guest cabins.

Hanging lockers are provided with rods and hooks.

Lockers are fitted with louvers for ventilation.

Floorboards with laid teak veneer, standard pattern.

Access to bilge is provided at as many places as practical. No trays.

 

DESCRIPTION:

Master: Forward Master Cabin with en-suite head with separate shower compartment and electrical head. Double bed with new fabric and mattress 2012. Big drawers under the bed. Wardrobe with full height hanging and shelves. Small chest of drawers and a small sofa. Wall cabinets on both sides. B&G FFD and 230-volt outlet.

Saloon: U-shape sofa to port with table and two seat sofa opposite. New beige leather upholstery. Wall cabinets and bookshelf. Storage space behind settee backrests. Curtains for side windows. 32” Samsung TV and DVD-player.

Galley alongside to starboard. Freezer in small sofa, fridge with two hatches and big drawers under. Alpes four burner stove. Nespresso machine in drawer unit. Drained cabinet for dishes. Custom made interior in drawers and cabinets

Day head to port with shower and electrical toilet. Cabinets and shelves.

Wet wardrobe to port with heater.

Nav table to starboard with 23” Dell computer screen, GPS, Icom VHF, Sailor Iridium phone and electrical panels. Drawers and separate chart storage.

Port aft cabin. Bunk beds with adjustable angle. Wardrobe with hanging and shelves. New mattress, 2012 (hardly used since).

Starboard aft cabin. Double bed that can be separated. Adjustable angle. Wardrobe with hanging and shelves. New mattress, 2012 (hardly used since).

ENTERTAINMENT: Blaupunkt DVD-Stereo connected to the Samsung TV + 2 speakers in saloon + 2 speakers in cockpit.

 

GALLEY/PANTRY:

Alpes Inox four burner gas stove with oven (2013) Custom Fridge, 2 openings Custom Freezer

Double s/s sinks Delonghi Nespresso Coffee Machine Gas Detector

Stowage for cooking utensils.

Adequate drawers and lockers. Cutting board.

Corian Cameo White covered worktop with deep fiddles.

Drying locker for dishes above sinks.  Garbage container under sinks.

Foot operated seawater pump.

Water faucet for hot and cold pressure water.

 

ENGINE & MECHANICAL

Engine: Volvo Penta diesel D2-55. Complete overhaul outside boat in 2012.

Current Engine Hours: approx. 150 since the refit.

Volvo Penta MD 130 Sail Drive Gear Box (Installed new 2012)

Volvo three blade folding Propeller 

Water Maker: Spectra, 60 litres/hour.

Prefilters and vane-pump mounted in engine room. Membrane and clark-pump (it’s relatively quiet) mounted in port aft cabin. Membrane changed 2013 and unused since.

Hot Water System: approx. 60 litres tank, heated by engine and 220v.

The tank is in the engine room.

Heating System: Eberspacher 5

Bilge Pumps: Two manual bilge pumps, and one electrical, with flexible hose to clear other bilge area.

Marine toilets: two electric Sani Marin SFA.

Refrigeration: Isotherm 24v, water cooled system without pump for fridge & freezer. Custom made fridge compartment with two top-loading openings.

Custom made freezer compartment in small central sofa.

“NASA” vacuum isolation panels to save space. 

The compressors are mounted at the galley (the area cooled by extra fan to be used in hot climates only).

 

ELECTRICAL SYSTEM

Shore Power: Yes, incl connection cable

Inverter: 1500 W, Mastervolt. Located port side forward in lazarette.

Batteries:  4 in total = 240 Ah, 24V. Two under owner bed. Two under floorboards.

Battery Charger: 50A Mastervolt, 24 volts. Located in engine room.

50 A 12 V alternator mounted to engine for starting batteries.

120 A 24V DC alternator driven by the main engine for the house battery bank.

 

ELECTRONIC SYSTEMS

Sailing Instruments:

B&G Hydra 2000, 4*20/20 Mast Displays, 4*FFD in Cockpit, 1*FFD at Nav table, 1*FFD in Saloon, 1*FFD in owners’ cabin.

Autopilot: B&G Hydra Pilot with Hydraulic Arm

GPS/Plotter: Simrad CP33 “old” plotter (Note: really due to be changed / updated, we believe that a B&G Zeus 9” or Vulcan 12” would fit in same panel)

Icom IC-M401 VHF/Radio at chart table.

Sailor Iridium Satellite Phone (no contract)

A new True Heading AIS transceiver was installed 2012.

Compass: B&G

Radar: - no

iPad custom fitting bracket in cockpit, (could be used for mounting a plotter).

Suunto compasses x 2 (one on each helm pedestal)

  

SPARS & RIGGING

Main Mast: Hall Spars Carbon

Boom: Hall Spars Carbon

Rigging: Hall Spars Carbon, new 2012

Headsail Furler: Reckmann Carbon with Carbon feeder

Hydraulics: Navtec hand operated / manual system for outhaul of main, boom vang, inner forestay and backstay, with control panel starboard side of cockpit.

Note: SPIRIT was originally fitted with OYS rod rigging. In her refit this was upgraded to carbon with all necessary fittings also changed.

  

SAILS

Main: North 3DL 2010

Jibs: North #1 3Di, 2012 Hamel Sails #3, 2010 North Inner jib, 2003, 31 sqm

Code 0: North 2003, 85 sqm

Spinnaker: North A2 2012, 210 sqm, North A3 2003

Other: Storm Jib 2003, Try sail 2003

  

ACCESSORIES

Tender: Avon 250 rib with 8 hp Yamaha (when deflated the dinghy stows in sail locker).

 

Trailer: Custom Baltic Cradle currently mounted on a custom-made high-quality trailer.

 

Other:

Big Dodger/Spray Hood.

Large teak cockpit table with carbon legs, and a smaller white painted cockpit table.

Two composite gas bottles in special, drained, compartment in port lazarette.

8 big fenders with grey covers (2013)

Extra Spade anchor (stored in aft port cabin).

General tool kit.

Winch handles.

Mooring lines.

Hot & cold freshwater shower in cockpit.

 

Fire & Safety Equipment

Life Rafts: Autoflug 8 pers

Life Jackets: Spinlock x 4

Life Rings/Belts: 2*MOM 8 Man over board units

Fire Extinguishers: Yes, 3 hand operated inside boat + automated installation in engine room.

Fire blanket, at galley.

Gas alarm in galley and remote gas switch.

  

REFIT & IMPROVEMENTS HISTORY

Spirit had a very extensive refit at Baltic Yachts in Finland the winter 2011-12 and returned again in 2012-13.

Total cost of the refit including material exceeded €460.000. Close to 4.000 hours.

 

Upgrades:

Bow spirit with integrated anchor installed in favour of spinnaker equipment. Carbon standing rigging from Hall Spars Electrical Main halyard winch

 

Recondition:

Topsides repainted silver metallic Hull sand blasted and new epoxy + antifouling treatment Teak refurbished.

All white on deck and cockpit area repainted (with Awlgrip white) Mast and boom painted white New pulpit All cockpit FFDs changed Deck hatches serviced New anchor windlass

Entire interior re-varnished Floorboards revarnished New leather upholstery in saloon New fabric in all cabins All ceilings new All hinges replaced

New electrical toilets New TV and stereo with DVD Cockpit and sailing lockers repainted inside All pumps serviced or replaced

Engine out of boat and completely overhauled New Volvo MD 130 S-drive

New A2 Gennaker from North New 3Di jib from North Old Gennakers recut to fit bow-spirit

Barber hauler for jib sheet installed

Clutches upgraded and old ones replaced. All running rigging new

All canvas new

New Exit Engineering Carbon wheels

Mooring lines new

 

Disclaimer:

These particulars have been prepared from information provided by the vendors and are intended as a general guide to the yacht, their accuracy cannot be guaranteed by us.  The purchaser should confirm details of concern to them by survey or engineer’s inspection.  The purchaser should also ensure that the purchase contract properly reflects their concerns and specifies details on which they may wish to rely.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Read more

Propulsion
Engine
1 x Volvo D2-55
Fuel
Diesel
Fuel capacity
95 gallons (U.S.)
Maximum speed
12 mph
Cruising speed
9 mph
Accommodation
Number of cabins
3

These particulars have been prepared from information provided by the vendors and are intended as a general guide to the yacht, their accuracy cannot be guaranteed by us. The purchaser should confirm details of concern to them by survey or engineer’s inspection. The purchaser should also ensure that the purchase contract properly reflects their concerns and specifies details on which they may wish to rely.

This Baltic Baltic 50 has been viewed 58 times
Broker/Dealer Information

Northrop and Johnson Spain

Concordia Yacht Company S.L. Edificio Dux Calle Porto Pi 4 1a
Palma de Mallorca
Baleares
07015
Spain
Please mention that you saw this boat on TheYachtMarket.
XXXX XXX XXX
ABYA Logo
ABYA YACHT BROKER

Setting the standards in yacht broking and conveyancing since 1912

Find out more

Thank you

Your message has been sent.

Ask for more photos

Email to a friend

Report this boat

Thank you, your message has been sent

Why not register your interest in these similar boats?

We will send the following details to the sellers of the selected boats: Your name, email address, phone number (if provided). your country and which boat(s) you are interested in.

Request More Information

Change units of measure

This feature requires cookies to be enabled on your browser.

Show price in:
Show lengths, beam and draft in:
Show displacement or weight in:
Show capacity or volume in:
Show speed in:
Show distance in: