Vicem Windsor Craft 40 for sale

Fort Lauderdale, FL, United States

$399,000 USD

Vicem Windsor Craft 40 - Photo 0
General information
Vicem Windsor Craft 40
Used power boat for sale
$399,000 USD
Length overall
Length on deck
14.00 tons (U.S.)
Fort Lauderdale, FL, United States

About this Vicem Windsor Craft 40


Banzai has just completed a re-fit with an open checkbook and is now a stunning example of the open salon Windsor Craft 40 built by Vicem Yachts.  Known for the cold-molded construction and hand crafted mahogany interior, this model features twin inboard Yanmar diesel engines, generator, AC, island berth in the master stateroom and private head with separate stall shower.  You will be in awe of the high gloss mahogany interior.  Updated electronics and equipment.   Compare any boat and you will not see better value in any boat...….. or one as simply beautiful as this one.


Cockpit and Salon

BANZAI has an open-salon allowing for an immense entertaining area when all of the canvas is removed.

Enter the cockpit through the transom door from the teak swim platform.  L shaped seating with a large varnished mahogany table is to port and there is a fresh water shower on the transom.

Forward on the starboard side is a varnished console that contains an electric BBQ grill, refrigerator, storage and wine chiller

Moving forward and up one step is the salon area under the hardtop.  Canvas with isinglass separates this area from the cockpit when needed.  Port side is a large sofa with varnished mahogany end tables on either side.  A custom TV lift is hidden in the side table with a Samsung tv installed.  Starboard is the U shaped galley with everything hidden below varnished cabinets when not in use.  Forward to starboard is the helm with custom wheel and updated electronics.  AC is provided in this area.

Overhead is an opening sun roof.  Canvas is provided including cockpit cover, window covers and table cover.

Engine room is accessed through hatch in cockpit with door leading forward.  Upgraded sound insulation provided by SOUNDDOWN.


Galley is located on deck, under the hardtop along the starboard side.  U-shaped and finished in beautiful high gloss mahogany with covered consoles fore and aft that lift to reveal granite countertops, stainless sink and electric cooktop.  In cabinets below there is a refrigerator/freezer, ice maker,  Sharp carousel microwave oven and storage.

Stateroom and head

The stateroom has a Queen size island berth with storage drawers below, mirror and headboard mounted on the bulkhead and reading lights on either side.  Beautiful high-gloss mahogany cabinets are both port and starboard.  Stainless steel opening ports are both port and starboard as well as overhead hatch.  Hanging lockers are port and starboard and there is both stereo and ac control.  Flat screen TV mounted on bulkhead.

Starboard side is the head with granite countertops, TECMA head, stainless sink, mahogany cabinets and opening stainless port.

Port side is a large, separate stall shower with seat, storage and opening stainless steel port.

Electronics and Entertainment

Garmin plotter



Side power bow and stern thruster

Ritchie Compass

Trim tabs

Spot light

Samsung 23" LCD TV in stateroom

Samsung 32" LCD SmartTV is salon on custom lift

Fusion stereo system

Clarion stereo speakers


Custom paddle board racks mounted on hardtop

Bow cushions with tie down straps for cabin top

Glendenning cable coiler 

Stainless steel swim ladder

PropSpeed on all running gear new 2019

Lofrans windlass

Plow stainless steel anchor

Rod holders

Underwater lights

Onan 7kw generator

Battery charger

Bennett trim tabs

Hydraulic steering

Cold Molding Explained

The cold-molded construction operation simply involves layers of thin veneers, oriented at different angles, glued over a mold.  The glue in this case being a specially formulated epoxy resin.  The marriage of engineered wood with formulated resins yields a hull that is lighter, stronger and more durable than a traditionally built boat.  There are two basic reasons for this:

1- Firstly, laminating several layers of wood at 90-degree angles optimizes the unidirectional strength of this naturally flexible product, making it ideally suited to resist and absorb the complex forces applied to a hull in a seaway.  Secondly,

2- Wood is a very strong material.  However, this strength is unidirectional, meaning you can easily bend the wood in one direction but it would break if you try to bend it in the other direction.  Binding together several layers of wood at 90-degree angles makes the hull much stronger in resisting the complex set of forces that effect the vessel during navigation.

Preventing the hull from absorbing more moisture than ideal is crucial in a wooden boat.  Many woods are two or even three times stronger when dry than they are when saturated with  moisture.  The cold molding system aims to keep the wood dry.  The epoxy soaks deep into the wood, sealing it off from moisture and oxygen.  Keeping the water out means no swelling and no rotting.  The glued joints are firmly bonded for long periods of time.  Through this method, the hull skin is built upon a wood frame in four directional layers of African or South American Mahogany (Sapele) composite planking.

The first layer (-45 degrees) is fastened to the frames, keel, chine and sheer strake with galvanized nails and saturated with epoxy; the second layer (+45 degrees) and third layer (90 degrees) are fastened and bonded with epoxy and stainless steel staples, while the fourth layer (0 degrees) is fastened via epoxy and stainless steel strapped staples that are then removed, leaving behind a smooth hull with no visible markings.  For larger, heavier yachts, an additional inner layer of edge-fastened strip planking mechanically locked together in a bead and cove fashion, with two outer layers of diagonally fastened mahogany planking, is required.  Both methods have mahogany laminated internal structural members for the keel, chine, sheer and beams.

The final structural construction step requires coating the entire bilge area, engine room and exterior of the hull with 10oz E-glass cloth, epoxy resin and a polyurethane paint system.  The exterior of the full is finished on top of the E-glass by multiple steps of long boarding, epoxy fairing compounds, epoxy primers and polyurethane paint to achieve a mirror-like finish.  The result is a yacht that has all the advantages of a laminated wood hull, such as natural insulating properties for sound and humidity, and is also stronger than standard fiberglass and traditionally built wooden yachts.

Read more

Yanmar 6LY3
Fuel capacity
225 gallons (U.S.)
Maximum speed
32 mph
Cruising speed
28 mph
Number of cabins
Number of berths
Drinking water capacity
60 gallons (U.S.)
This Vicem Windsor Craft 40 has been viewed 310 times
Broker/Dealer Information

Semmes Yachts

Ms Noelle Semmes
222 Severn Avenue
United States
Please mention that you saw this boat on TheYachtMarket.

Thank you

Your message has been sent.

Ask for more photos

Email to a friend

Report this boat

Thank you, your message has been sent

Why not register your interest in these similar boats?

We will send the following details to the sellers of the selected boats: Your name, email address, phone number (if provided). your country and which boat(s) you are interested in.

Request More Information

Change units of measure

This feature requires cookies to be enabled on your browser.

Show price in:
Show lengths, beam and draft in:
Show displacement or weight in:
Show capacity or volume in:
Show speed in:
Show distance in: