English
This capable alloy cutter has carried her owners safely around the Pacific islands, much of Indonesia and Malaysian waters before reaching Langkawi. It has been a great family yacht and proved so reliable. A new keel was professionally built and installed, Veritas certified, in New Caledonia in 2019, all welds correctly examined, and the yacht is ready to go again.
The construction was a strong build, 12mm, 8mm and 6mm plate.
Accommodation
The yacht has a good aft cabin and another smaller double aft and to port plus the forepeak double. It is a good layout with the raised galley and nav station.
Galley
- ENO 2 burner hob and oven (2017)
- DANFOSS fridge
- Double sink with pressurised fresh and salt water
Heads
One manual.
Electronics & Navigation
- NKE gyro autopilot
- NKE depth sounder
- ST60 sailing instruments
- ICOM M605 VHF radio
- Portable VHF radio
- AIS transponder
Batteries & Electrics
12VDC system with a house bank of 2 x 300 amp gel batteries (2011) and 1 x AGM engine start battery 2015)
DC charging from one 300 watt solar panel c/w MPPT controller, AEROGEN 4 wind generator and main engine 90 amp alternator.
1000 watt inverter.
Automatic electric bilge pump.
Sail Inventory
- Dacron mainsail,slab reefed (2018)
- Dacron genoa on PROFURL gear (2018)
- Dacron staysail on PROFURL gear (2018)
- Storm jib
Mast & Rigging
The rig was unstepped and re painted, fully serviced where necessary and re painted in 2019. Running rigging from 2014, standing rigging 2004, thoroughly examined in 2019.
Deck Gear
- Self tailing winches
- Stainless steel stern arch for solar panels and wind generator
- Rigid dodger
- Granny bars
- Slotted aluminium toerail
- BBQ
- WINDPILOT Pacific
Safety Gear
- PLASTIMO life raft (needs service)
- 5 pfd's
- Flarepack
Ground Tackle
- LOFRANS 1000 watt windlass
- SPADE anchor
- 80m of 10mm chain (2018)
- 25 kg DELTA
- 15 kg CQR
- Three long warps
Dinghy & Outboard
Alloy RIB, hypalon tubes c/w covers (2017). Yamaha Enduro 15hp two stroke (2013).
Other Equipment
BABAR