Sabre Yachts 34 for sale

Camden, ME, United States

$36,000 USD

General information
Sabre Yachts 34
Used sail boat for sale
$36,000 USD
Length overall
Length waterline
5.90 tons (U.S.)
Full Keel
Camden, ME, United States

About this Sabre Yachts 34


     "After 30 years, the Sabre 34 holds its hard-to-beat edge in comfort and class." Barbara Dawson - Cruising World July, 2008     New engine in 2010 with about 150 hours on it. Tempest is a nice example of the Sabre 34 MKI with the major improvement of a Yanmar engine that you can actually work around. Tempest has been regularly upgraded and well maintained.


     The Hull is a single  unit hand laminated fiberglass molding using alternate layers of mat and roving with additional layers of fiberglass and balsa core in high stress areas.  The interior construction is of hand-crafted wood. Oiled burma teak is used on all visible surfaces except the head.  Varnished Mahogany is used under the berth cushions and in other concealed areas.  All trim, drawer fronts and locker doors are solid teak.  The cabin sole is striped teak. 

     The Deck is hand laminated fiberglass with balsa core  stiffening and non-skid deck surface molded in.  The toe-rails, hand-rails, coaming caps and trim are all  Burma Teak.  The Companionway hatch has a fiberglass spray hood for foul weather protection.  A foredeck  anchor well simplifies the handling of ground tackle.  Two large aluminum framed hatches with Lexan translucent panels provide light and ventilation in the forward and main cabins. The sliding main hatch is constructed of translucent Lexan, plastic with a teak frame.  The welded bow pulpit, stanchion posts, stern rails , two gates, plus upper and lower lifelines.

Deck and Hull Equipment

  • (2) Lewmar 40's primary self tailing winches
  • (1) Lewmar 30 halyard self tailing winch
  • (2) Lewmar 16 - 2 speed winch
  • Maxi Prop (2) blade feathering prop
  • Shaft and cutlass bearing
  • Cockpit cushions
  • Dodger
  • Edson pedestal mounted cockpit table
  • Plow anchor
  • Danforth anchor
  • 25 Feet of chain and rode
  • Collapsible swim ladder

Sails and rigging

  • Aurora Main ~ 2008
  • Doyle 135% composite Genoa ~ 2015
  • 160% Dacron Genoa
  • Spinnaker (never used)
  • Furlex head sail furling system


  • Raymarine Chartplotter
  • Raymarine ST6002 Autopilot
  • Raymarine ST60 + Depth
  • Raymarine ST60+  Speed
  • Raymarine ST60+  Wind
  • Simrad VHF AIS compatible with remote
  • Ritchie compass integrated into binnacle


  • 12 Volt/110 volt panel with fuses
  • (2) Group 27 gel batteries
  • Battery switch
  • Solar panel with regulator


     Entering the salon from the companion way there is a forward facing navigation to port. Just aft of the navigation station to port is a single pilots berth. To the starboard of the companionway is the u-shaped galley. Forward of the galley and navigation station is the salon with a large drop down table, expandable double berth to starboard, and entertainment system.  Moving forward to starboard is the head with a large hanging locker and drawer storage opposite to port. Continuing forward is the large master cabin with v-berth, infill to expand v-berth to a double and storage below the bunks.

     Accommodations for 5 adults

  • Teak wood interior
  • Varnished teak sole

Navigation Station

      The large navigation station features:

  • Teak furniture
  • Storage below lifting work surface
  • Simrad AIS display (see Electronics)
  • Storage drawers on inboard facing surface below work surface


      The large salon is multi functional as a dining area, entertainment space, second cabin and lounge. This area features:

  • Custom upholstery
  • Teak paneling
  • Varnished teak sole
  • Drop down teak table with expandable leaf
  • Built in book shelf and wine rack
  • Storage above port and starboard settee
  • Reading lamps
  • Flat screen TV
  • Expandable double berth to starboard

Master Cabin

      Opening to the storage area across from the head this cabin features:

  • Teak paneling
  • Varnished teak floors
  • Custom upholstery
  • V-berth
  • Infill to convert V-berth to double
  • Storage drawers below V-berth, port and starboard
  • Storage shelf port and starboard above bunk


     The head opens into the hallway between the v-berth and the salon. The head features:

  • Manual marine head
  • Single basin sink
  • Fresh water tap head
  • Toilet paper cover
  • Storage above and below basin
  • Shower head


     The u-shaped galley features:

  • White Formica counter-tops with varnished teak trim
  • Built-in trash bin with opening on counter top
  • Galley storage above counter tops with sliding door access
  • Work space extender/cooker cover
  • Propane Force-10 range with (2) burner cook-top and oven
  • Counter-top loading ice box
  • Double basin stainless steel sink
  • Fresh water tap head
  • Storage drawers on inboard facing furniture

Upgrades and Maintenance

  • Port light lenses replaced and resealed '19
  • Bilge pump rewired to work independently of panel '19
  • Cockpit sole re-cored and painted with Awlgrip '18
  • Custom built teak seats in cockpit '17
  • New Doyle 135 Genoa, cruising composite ‘15
  • New self-tailing Genoa winches, Dynema sheets ‘15
  • Solar panel battery charge controller ‘15
  • New Furlex line guide system ‘15
  • Simrad VHF with AIS functionality ‘15
  • New sink faucets in galley and head ’14
  • New Plexiglas port lenses and gaskets in cabin ‘14
  • New ball bearing traveler system, main sheet ’14
  • Strip bottom paint, epoxy barrier coats and Trinidad Pro hard ablative ‘13
  • Adjustable Genoa lead block system ‘13
  • New Yanmar diesel engine, shaft, drip-less seal, and feathering prop ‘10
  • All lines to through hulls, head, cockpit, engine, drains etc. ‘09
  • Johnson backstay control and backstay ’09
  • New Dacron mainsail, Aurora Sails ‘08
  • Lifelines and gate fittings ’08
  • Electric bilge pump ‘08
  • Raymarine GPS chart plotter, autopilot and wind instruments ‘08
  • New upholstery, Sunbrella  ‘07
  • New sail covers and helm cover ‘07
  • Replaced water lines, foot pumps, and electric water pumps ‘07
  • New teak toe rails ’07

Represented by a Certified Professional Yacht Broker (CPYB)

    A Certified Professional Yacht Broker (CPYB) is recognized as having achieved the highest level of industry accreditation, available only to fully-qualified yacht sales professionals. The CPYB program is administered by Yacht Brokers Association of America in partnership with Florida Yacht Brokers Association, Northwest Yacht Brokers Association, California Yacht Brokers Association, Boating Ontario Dealers, British Columbia Yacht Brokers Association and Gulf Coast Yacht Brokers Association.

     The CPYB program is also endorsed by the Marine Retailers Association of the Americas (MRAA) Marine Industry Certified Dealership (MICD) program and leading yacht manufacturers as a key component of their own industry standards; the highest level of achievement for their member yacht sales professionals.

Experience & Validity

     The CPYB designation is earned by eligible yacht sales professionals, who, after serving a minimum of three years as a full-time professional, have successfully completed a comprehensive written examination to validate professional competency.

Continuing Education

     A CPYB is committed to their personal and professional development through continuing education, as mandated for CPYB recertification every three years.

Ethics & Standards

     A CPYB adheres to, and is accountable to, a nationally recognized Code of Business Ethics and conducts yacht sales transactions in accordance with a stringent set of industry standards of practice.

Fiduciary Responsibility

     A CPYB maintains a dedicated escrow/trust account to protect their client’s funds. A CPYB understands their fiduciary responsibility and obligations with respect to client funds.

Transaction Management

     A CPYB uses proven, industry-recognized transaction documents, which fully and clearly describe all terms and conditions of a transaction. Honesty & Integrity A CPYB maintains the highest standards of professionalism, acting with honesty and integrity.

Trust & Confidence

     A CPYB instills confidence, trust and consistency in all transactions involving fellow yacht sales professionals for the benefit of the client.

Other Equipment


Read more

Yanmar 3YM20
Engine hours
Fuel capacity
20 gallons (U.S.)
Cruising speed
7 mph
Drinking water capacity
44 gallons (U.S.)
This Sabre Yachts 34 has been viewed 584 times
Broker/Dealer Information

East Coast Yacht Sales

106 Lafayette Street
United States
Please mention that you saw this boat on TheYachtMarket.

Thank you

Your message has been sent.

Ask for more photos

Email to a friend

Report this boat

Thank you, your message has been sent

Why not register your interest in these similar boats?

We will send the following details to the sellers of the selected boats: Your name, email address, phone number (if provided). your country and which boat(s) you are interested in.

Request More Information

Change units of measure

This feature requires cookies to be enabled on your browser.

Show price in:
Show lengths, beam and draft in:
Show displacement or weight in:
Show capacity or volume in:
Show speed in:
Show distance in: