Ker 41 for sale

Turkey

£355,196GBP
Listed price $430,000 USD

Tax Not paid / Excluded

Ker 41 - Default Image
General information
Make/model
Ker 41
Category
Used sail boat for sale
Price
£355,196 GBP | Listed price $430,000 USD
Price comment
Tax Not Paid
Tax / VAT status
Not paid / Excluded
Year
2016
Length overall
12.50 metres
Hull
Carbon Fibre hull
Keel
Fin Keel
Location
Turkey

About this Ker 41

English

“ANYTHING” is a full carbon, pre-preg build that is based on the hugely successful Ker 40+ design and was launched in 2016.

She benefits from the R&D work done within the new FAST 40 Class and so optimization is to the highest level. However “ANYTHING” offers more than meets the eye, with her build and design being much more focused towards sailing offshore, as well as inshore.
Higher topsides and an altered deck arrangement to name but few!

Rig

Sloop

SAIL PLAN

P – 16.97 m

E – 5.89 m

I - 16.39 m

J - 5.10 m

SPA 190 M²

STL 7.55 m

RIG (Hall Spars High Modulus)

• High modulus HR40 prepreg carbon fibre.

• Autoclave cured at 120 degrees Celsius at 6 bar.

• Mast tube made on a mandrel.

MASTHEAD

• Masthead with sheaves for main and spinnaker halyards.

• One (1) main halyard 1:1. (with locker system)

• Two (2) spinnaker halyards in side by side arrangement, With trip line locks x2 capable of code zero sails.

• Delrin sheaves with composite bushings.

• Chafe protection for all halyards.

• Led white anchor light.

• Attachment for twin topmast backstays.

HOUND BOX

• Machined hard coat anodised aluminium headstay lug.

• Hard coat anodised aluminium sheave box for one (1) genoa halyard on trip line lock x1.

• Delrin sheaves with composite bushings.

• Hard coat anodised aluminium sheave box and spectacle for one (1) fractional spinnaker.

STAYSAIL HALYARD

• One (1) staysail halyard capable of using a genoa staysail.

• A hoisting stay position is installed above the staysail sheave.

MAINSAILTRACK

• Hall carbon bolt rope track with Antal cunningham track.

SPREADERS

• Two (2) sets of tapered carbon air foil 34-700 high modulus spreaders.

• Spreaders attach using spreader bars.

• Spreader ends S1 to suit tip cups.

• Spreader ends S2 to suit spreader bends.

• Diagonals terminate in spreader bars.

• Option for composite rigging to attach using the same spreader specs.

HALYARD EXITS

Below deck at base

• One (1) mainsail halyard. Below deck sheave box.

• Two (2) masthead spinnaker halyards. Code 0 halyard below deck turning block

• One (1) fractional spinnaker below deck turning block

• One (1) staysail halyard below deck turning block.

• One (1) genoa halyard, to exit the mast above deck and travel through the spartite to a mast mounted single block on lashing strop.

MAST STEP

• Adjustable slot mast step with screw adjuster.

• Eye strap on aft face of mast for emergency tie down.

• Internal mast ram with gauge and pump.

• Mast gate customized to rectangular shape to allow shims.

FINISH

• Clear awlgrip.

• Contrasting measurement bands.

RACING BOOM: CARBON

• High Modulus autoclaved cured prepreg carbon fibre.

INBOARD END

• Aluminium hard coat anodized sheave box with sheaves for one (1) outhaul & two (2) reef lines.

• Ronstan constrictor single clutches for reef line one and two.

• Delrin sheaves with composite bushings.

OUTBOARD END

• Sheave box with three (3) sheaves for (1) outhaul and two (2) reef lines

HEADSAIL FOIL

• Tuff luff aero Harken

• Assembled on headstay.

STANDING RIGGING - Twin Top Mast Backstays - 2 x Kevlar

Discontinuous Rod standing Rigging

Carbon forestay with dynex adapter for jib tack slide

Backstay 5T load.

Broker comments

IRC TCC - 1.254 in 2018.

She is a slightly more rugged and forgiving platform compared to the Ker 40+ and carries a little more bulb weight to punch her through offshore conditions.

The increased free board is a god send in any wave height, as its not only a dryer deck, but also a good increase on interior volume.

Full boat cover (deck)

Boom cover

Carbon fibre life line rollers and end fittings - (2 sections port and starboard, from pulpit to shrouds)

Mainsheet traveller on spacers.

Soft padeyes instead of folding pad eyes where ever possible

Auto pilot mounting bracket

FINISHES

Black awlgrip paint onto 4 layer clearcoat varnish finish to top sides and deck gloss areas.

Non-skid areas on fore and side decks.

Cockpit Floor: Raptor non-skid foam grip.

Below water line: Finished with epoxy primer.

Interior: Lightweight racing paint finish in grey to inside area.

ENGINE

30 hp yanmar diesel engine with sail drive.

Folding 2 bladed prop.

Spinlock flush throttle control.

46 Litre rigid plastic fuel tank

PLUMBING

Freshwater hand pump at galley sink. Lightweight head.

7 automatic bilge pumps.

1 x 50 litre fresh water bladder tanks.

INTERIOR

Under cockpit navigation station

Galley: sink.

Engine box with integrated bottom steps

SPINLOCK LIFE JACKET (WITH BOAT NAME WRITTEN )

SPINLOCK HARNESS

LIFE LINES SETEMERGENCY FIRE SET

FIRE EXTINGUISHER (2 kg)

Winch and Pedestal package:

-2 x Driven primary winches harken 65.3 STR UD.

-1 x Harken Air pedestal mounted in front of traveller, linked to primary winches.

-1 x pit winches harken 50.2 STP performa.

-2 x main sheet winches harken 50.2 STP performa

-2 x backstay winches harken 50.2 STP performa

-2 x Foot button controls for pedestal

Harken ‘Pro-Trim’ traveller system

7 x spinlock clutches along with custom organizers.

Composite aerofoil stanchions, pushpit & pulpit.

Stainless steel 1/19 wire lifelines.

Sliding fore hatch with inflatable seal.

Custom Harken Drop down drum and gear box with control cleat system on to grinder (spinnaker retrieval)

McConaghy twin steering wheel system, with carbon pedestals.

Custom carbon foot bars for runner and mainsheet man.

3 x Unreelers for spinnaker sheet and spinnaker halyard tidy up

Mainsheet trimmer console and purchase system for main cunningham, outhaul, jib tack & traveller

Diverse Yachts – Non-hydraulic deflector drum.

Electronics:

B&G H5000 PREFORMANS PACK

B&G H5000 GFD DIISPLAY 20*20

B&G H5000 FFD DISPLAY 20*20 B&G

H5000 FFD DISPLAY 10*10

HS70 GPS COMPAS

H5000 3D MOTION SENSOR

H5000 VMHU 1050mm WIND BRACKET

FORESTAY LOADPIN

ZG100 GPS ANTENNA

ICOM IC-M323 VHF

SM2-25 STRINGPOTS

PANASONIC CF53 TOUGHBOOK

EXPEDITION MARINE SOFTWARE

C-MAP EAGEAN SEA

86290CF ENDOSCOPE

HALL SPARS CARBON MAST BRACKET

ALL ELECRICAL SYSTEM DESIGN AND ASSEMBLY BY DIVERSE YACHTS.

Battery monitoring system with fast charge system.

Portable shore power battery charging system.

Electric auto/manual bilge pump system. (8 Additional Bilge Pumps).

White cabin lighting in saloon, galley, head and navigation areas. (all is LED)

12-volt DC switch panel battery isolator/selection switch.

2 x 100 Amp House Lithium batteries.

1 x 30 Amp Engine Lithium battery.

Navigation lights pulpit, pushpit mounted.(LED)

Construction:

Jason Ker used the base Ker 40+ design, but then customized and tuned the design to work better for this owners requirements, including making the boat more offshore friendly.

“ANYTHING” is a Carbon pre-preg/foam/epoxy construction, using uni-directional carbon reinforcement in the highly loaded area.

She has a fully optimized structural design using advanced Finite Element Analysis techniques and is designed and constructed in accordance with ISO structural regulations.

Top side height has been increased from the standard Ker 40+, which offers better sea-going capabilities, as well as increased interior volume, making her a very strong all-rounder and a true performer under both IRC and ORC rating rules.

Builder - DERE SHIPYARD TURKEY

Launched - December 2016

LOA - 12.6 M

Beam - 4.20 M

Draft - 3.00 M

Disp - 4.550 Kg

Bulb weight - 2150 kg

DLR – 92

IRC TCC – 1.254

Crew # - 11

ISO Structural – CAT A

Read more

Propulsion
Engine
30 (Shaft Drive)
Additional Accommodation Details

Sail Inventory:

NORTH SAILS MAIN – 3Di 2 Reef 2016

NORTH SAILS JIB LIGHT – 3Di 2016

NORTH SAILS MEDIUM – 3Di 2016

NORTH SAILS MEDIUM – 3Di 2018 (June)

NORTH SAILS HEAVY – 3DL (Carbon) 2016

NORTH SAILS No.4 – 3DL (Carbon) 2016

UK SAILS STAY SAIL - 2016

UK SAILS CODE 0 – 2016 (15hrs use)

NORTH SAILS KITE A1.5 – 2017 (July)

ONE SAILS KITE A2 – 2017 (August)

ONE SAILS KITE A3 – 2017 (September)

NORTH SAILS KITE A4 – 2018 (June)

Additional Sails:

UK SAILS MAIN – XDrive - 2016 (5hrs use)

UK SAILS JIB MEDIUM – XDrive - 2017 (5hrs use)

UK SAILS Kite A2+ - 2017 (repaired)

Storm Jib and Trysail.

This Ker 41 has been viewed 2149 times
Broker/Dealer Information

Ancasta Ancasta Raceboats

Port Hamble Satchell Lane Hamble
Southampton
Hampshire
SO31 4QD
United Kingdom
Please mention that you saw this boat on TheYachtMarket.
XXXX XXX XXX
ABYA Logo
ABYA YACHT BROKER

Setting the standards in yacht broking and conveyancing since 1912

Find out more

Thank you

Your message has been sent.

Ask for more photos

Email to a friend

Report this boat

Thank you, your message has been sent

Why not register your interest in these similar boats?

We will send the following details to the sellers of the selected boats: Your name, email address, phone number (if provided). your country and which boat(s) you are interested in.

Request More Information

Change units of measure

This feature requires cookies to be enabled on your browser.

Show price in:
Show lengths, beam and draft in:
Show displacement or weight in:
Show capacity or volume in:
Show speed in:
Show distance in: