CORBY YACHTS Corby 40 Custom Zu verkaufen

English

Construction

• Constructed in strip cedar and glass, with a foam core deck.
• 2008/9 - Restored and re-fitted Corby Yachts 2009 for Brian Wilkinson with new fin and keel, hull shape returned to original 1996 lines, full re-fair of hull and Awlgrip finish.
• Further investment in 2020 with a full respray and new sail wardrobe.
• Full respray by Dettaglio finishing early 2020 including full hull repaint, deck, cockpit and rig.
• Below the waterline including the keel and rudder was painted with Durepox white and wet sanded to p1000 for a race finish.
• Topsides painted in Awlcraft 2000 Toreador Red, cockpit and gloss margins in Awlcraft 2000 Matterhorn White.
• Non-skid painted in Matterhorn white in Awlgrip G-line for a harder wearing finish.
• IRC handicap 2021: 1.110.

Machinery

Engine & Gearboxes:

• 2016 Yanmar 28hp with saildrive.

Electrical Systems

Battery Banks:

• 1 x 80 Ah starter.
• 1 x 80 Ah service.
• 3 way switch at Nav. table.

Tankage

Fuel:

• 60 litre fuel tank (13.19 gallons).

Navigation Equipment

• B&G Hydra 2000 with 4 x mast mounted 20/20s.
• 2 x FFD.
• B&G Compass.
• Actisense Multiplexer: feeding laptop interface cable and AIS.
• 1 x Plastimo steering compass.
• Raytheon SG1 autopilot with course computer.
• Rate gyro compass.
• ST6001 control head.
• Linear drive.
• Hand held wireless controller.
• Ram to be serviced.

Domestic Equipment

Galley:

• Jetboil cooking.
• 20ltr water container.
• 2 x whale pump for salt and fresh water supply.
• Sink.
• Cool box.

Heads/Showers:

• Jabsco manual.
• Sink with pump tap for salt water.

Lighting:

• 1 x Mast tri colour 25W.
• 1 x 25W bow bicolour and stern light 25W.

Accommodation

Summary of Accommodation:

• 8 x Pipe cots.

Deck Equipment

Rig:

• Carbon Mast: C spars, including spinnaker car track, “spar-tited” at partners.
• Carbon Boom: Unknown, believed C spars.
• Boom and mast resprayed in Durepox black with a top coat of Durepox clear in 2020
• 1 x Enerpac hydraulic mast jack plus 2 rams.
• 3 x Mast shims.
• Carbon bowsprit: Cracklin’ Rosie currently set up as asymmetric boat
• Navtec:  Hydraulic backstay
• Standing rigging: Rod rigging 100% replacement at The Rig Shop, Southampton 2008 with full inspection in 2020.
• Harken headfoil.
• Dyneema/Vectran throughout, all in good condition, Tylaska fitted on all halyards
• 2 x Jib.
• 2 x Spi.
• 2:1 main halyard.

Winches:

• Halyard – 2 x Harken 46.
• Primary – 2 x Harken 48.
• Mainsheet – 2 x Harken 48.
• Checkstay – 2 x Harken 40.

Sails:

• 2020 North wardrobe.
• Mainsail with 2 reefs.
• J1 North 3Di.
• J2 North 3Di.
• J3 North 3Di.
• Older J4 with little use.
• Code 0 Helix with top down furling.
• GS on furler.
• SS on furler.
• A2.
• A4.
• A3/5.
• Delivery Mainsail.
• Storm jib and trysail.
• Older VMG spinnaker.

General:

• Cradle: Steel (approx. 2” box section).

Covers, Canvas & Cushions:

• 2 x Red leather feel bunk cushions.
• 2 x Fender skirts Pigbags, (Hamble) fleece backed.
• Winch and halyard bags

Safety Equipment:

• To RORC Category 2.
• AIS.
• DSC VHF (fixed) integrated with GPS) 2020
• 1 x MLR fixed GPS.
• 1 x 405Hz EPIRB (2021)
• 1 x 10 man liferaft serviced 2020.
• Offshore flare pack to RORC Cat 2.
• Inflatable danbuoy and horseshoe, rigid horseshoe with self- igniting lights and drogues.
• 1 x 25m Throwing line.
• Helistrop
• 1 x Emergency tiller (steel for direct attachment to quadrant).