Bruce Roberts Cutter Cruiser Zu verkaufen

Plymouth, Vereinigtes Königreich

£70.000 GBP

Steuer Bezahlt/enthalten

Bruce Roberts Cutter Cruiser
Allgemeine Angaben
Fabrikat/Modell
Bruce Roberts Cutter Cruiser
Kategorie
Used boot für verkauf
Preis
£70.000 GBP
Steuer-/Mehrwertsteuerstatus
Bezahlt/enthalten
Jahr
1996
Gesamtlänge
11,51 meter
Länge auf Höhe der Wasserlinie
10,62 meter
Schiffsbreite
3,78 meter
Tiefgang
1,70 meter
Kiel
Flossenkiel
Standort
Plymouth, Vereinigtes Königreich

Über diesen Bereich Bruce Roberts Cutter Cruiser

English

A steel one-off sailing yacht based on a Roberts 370C, offering spacious accommodation and 7ft headroom. She was professionally welded by F.L.Steelcraft, and fitted out by the current owners to a high specification. She has been extensively cruised both in UK waters and in the Mediterranean and is set up for long distance cruising. It is with heavy hearts that the current owners must sell due to ill health. Consequently, she will be sold with a lot of additional equipment. 

CONSTRUCTION

Steel hull
Epoxied 2019
Cream topsides and coachroof completely re-sprayed in 2019
Rounded bilge
Fin keel & skeg rudder
Flexiteak deck (2019)
Green treadmaster non-slip matting to coach roof
Insulated throughout down to the waterline using Lloyds approved system

ENGINE, STERN GEAR & PROPULSION OPTIONS

Nissan LD20 55hp marine diesel engine (oil and filters changed 2021)
3061 engine hours
PRM Delta hydraulic gearbox
3-bladed bronze prop
Shaft with an Ambassador 3-bladed rope cutter
The shaft seal is oil fed

DECK EQUIPMENT

Genoa sheet traveller tracks
Staysail sheet traveller tracks
Stainless steel handrails on coach roof
Bimini
Wind generator
Outboard bracket on pushpit
Life raft bracket on pushpit
Solar panels (2x 40W)
Stainless steel boarding ladder
Delta bow anchor with 70m of 10mm galvanised chain
Quick Antares electric anchor windlass
16kg Bruce anchor
Brittany kedge anchor
2x Lewmar 45st 2-speed self-tailing primary winches
2x Harken 40st 2-speed self-tailing secondary winches
2x Harken 16st self-tailing sheet winches
SeaGo life raft for 4 persons (serviced Feb '21)
Horseshoe life buoy
Danbuoy
Radar reflector
Deck floodlight 

PLUMBING/GAS/HEATING/REFRIGERATION

Jabsco manual toilet to heads
Nelson Tecma gas cooker with 2 burners, oven and grill, all with flame failure. Hob fitted with fiddles. 
Water tank capacity 2x 225L
Fuel tank capacity 1x 60L day tank and 1x 125L main tank in keel
Mikuni diesel heating
Top loading fridge/freezer
Twin stainless steel sink
Manual and electric bilge pumps
The water system is fully pressurised with an electric pump. Galley cold water is supplied through an industrial spec filter
Foot pump can be connected in an emergency

ELECTRICAL

4x batteries
2x 110ah, 1x 225ah and 1x90ah engine starter battery
Batteries charging by alternator with sterling smart charge
220V shore power with smart charger

NAVIGATION & ELECTRONICS

Raymarine Dragonfly chart plotter
Raymarine iSeries echo sounder
Raymarine Evo autopilot with hydraulic ram
Raymarine log, speed, depth and wind instruments
Furuno radar
Lowe HF250 receiver
Garmin 152H GPS with internal and external aerial
NASA Target Navtex
Suunto compass
iCom IC-M421 DSC VHF
McMurdo AIS receiver with aerial splitter
Goodmans radio/CD player

RIG & SAIL

Cutter rig
Z Spars aluminium mast
Z Spars slab reefing boom
Z Spars rod kicker
Standing rigging (2016)
Running rigging replaced on a rolling basis
Inner forestay with Furlex 200S (2014)
Forestay with Furlex 300S (2019)
Both Furlex overhauled/serviced 2019
Mainsail fully battened with 3 rows of reefing, lower 2 single line. Long distance cruising spec.
Yankee radial cut, long distance cruising spec
2nd Yankee cross cut, long distance cruising spec
Staysail cross cut, long distance cruising spec

INTERIOR

Forepeak cabin with double berth
Starboard aft cabin with double berth
Port aft heads with shower and wet storage locker
Teak furnishings throughout to include cabin doors
Upholstery in Duck Egg (all covers removable and machine washable)
Wooden chart table
Laptop table above chart table
Brass clock and barometer
Coastal pack flares
3x fire extinguishers
Fire blanket

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Mehr lesen

Antrieb
Motor
1 x Nissan LD20
Kraftstoff
Diesel
Reisegeschwindigkeit
11 kilometer pro stunde
Unterbringung
Anzahl der Kabinen
2
Anzahl der Liegeplätze
7
Dieser Bruce Roberts Cutter Cruiser wurde 1834 Mal angesehen
Händler Informationen

Red-Ensign Ltd.

The Offices, Port Pendennis Marina, Challenger Quay
Falmouth
Cornwall
TR11 3XZ
United Kingdom
Erwähnen Sie, dass Sie dieses Boot auf TheYachtMarket gefunden haben.
XXXX XXX XXX
ABYA Logo
ABYA YACHTHÄNDLER

Maßstäbe setzen In der Yachtvermittlung und -förderung seit 1912

Finde mehr heraus

Vielen Dank

Ihre Nachricht wurde gesendet.

Weitere Fotos anfordern

E-Mail an einen Freund/eine Freundin senden

Ihre Nachricht wurde erfolgreich gesendet

Warum nicht Interesse an diesen ähnlichen Booten bekunden?

Wir senden folgende Daten an die Verkäufer der ausgewählten Boote: Ihren Namen, Ihre E-Mail-Adresse, Ihre Telefonnummer (falls angegeben), Ihr Land und an welchem Boot bzw. welchen Booten Sie interessiert sind.

Weitere Informationen anfordern

Maßeinheiten ändern

Für diese Funktion müssen Cookies in Ihrem Browser aktiviert sein.

Preis anzeigen in:
Länge, Breite und Tiefgang anzeigen in:
Wasserverdrängung oder Gewicht anzeigen in:
Kapazität oder Volumen zeigen in:
Geschwindigkeit anzeigen in:
Reichweite anzeigen in: