Beneteau Oceanis 423 Clipper for sale

Attica, Greece

72,000 EUR
approx £62,266GBP

Tax not paid / excluded

General Information

Make/model
Beneteau Oceanis 423 Clipper
Category
Used sail boat for sale
Price
Price comment
Please mention that you saw this boat on The Yacht Market
Tax / VAT status
Not paid / Excluded
Name of boat
S/Y Ithaki
Year of manufacture
2004
Designer
Groupe Finot
Length overall
13.09 metres
Beam
3.90 metres
Draft
1.72 metres
Displacement
8,800 kg
Hull
GRP
Location
Attica, Greece

Propulsion

Engine
YANMAR 4JH3E 55hp
Fuel
Diesel
Fuel capacity
200 litres

Accommodation

Number of cabins
4
Number of berths
6
Passenger capacity
8
Drinking water capacity
540 litres
S/Y Ithaki is a Beneteau Clipper 423 built in 2004. She has been used as a charter boat but her maintenance record is excellent. VAT status is not paid. She was recently fully serviced for the new season but her owner decided to put her in the market. New sails were fitted in 2014 and the batteries were replaced in 2016. Two 100W solar panels attribute to the energy recovery if the engine is not being run. The inverter is rated at 600W. Engine is a Yanmar 4JH3E 55HP. The boat is available for viewing upon previous arrangement.

About this Beneteau Oceanis 423 Clipper

Groupe Finot is responsible for designing this handsome, versatile 42-foot cruiser. This cruiser is extremely well-engineered, sensibly constructed and outfitted, and does not demand undue maintenance. The robust, hand-laid solid fiberglass hull is built to CE Offshore A category standards. The hull is supported by Beneteau's proven grid system-a bonded fiberglass hull liner that stiffens the hull and spreads loads from the rig throughout the boat. The deck is a cored sandwich construction to keep weight down, although a solid laminate is used to support high-load areas. The bulkheads are bonded 360 degrees to hull and deck. The cast-iron bulb keel is externally fastened to the hull. The draft is 1.8m. The prop is well protected in a small skeg as opposed to a more vulnerable strut. The balanced rudder is positioned well aft for good steering control, and the rudder is composite construction, including the stock. The cockpit is large, comfortable and very well thought out. A fiberglass steering pedestal and console incorporates instrument pods and a table with folding leaves. The helmsman's seat folds up to allow easy access to the transom steps where you will find a hot water shower. Lewmar 48 CSTO winches mounted on the cockpit coamings are the standard primaries. The cockpit is quite wide as the 423 carries its beam well aft. The cockpit can easily accommodate six people without feeling crowded. All other sail control lines are led aft and there are two Lewmar 40 CSTO winches on the coachroof with stoppers port and starboard. The saloon is spacious, as the designers have pushed the interior right out to the hull sides. A U-shaped dinette is to starboard with all around seating. There are lockers with louvered doors outboard and a handsome bookshelf on the bulkhead. A settee is opposite to port with additional storage above and behind. The 423 carries 154 gallons of fresh water. The bow tank is integrated into the hull liner in the bow and the plumbing system is very well laid out and accessible. The rotomolded fuel tank is aft with a capacity of 54 gallons. The Yanmar 4JH3E engine is extremely quiet and very efficient. Access is from behind the companionway step.

Yacht Specifics

Type: BENETEAU OCEANIS 423 Clipper

Year of build: 2004

Length in feet: 42

Length in meters: 13.09

Beam: 3.90m

Hull Material: GRP

Draft: 1.70m

Displacement: 8800kg

Cabins: 4/3

WC / Shower: 3/3 Jabsco manual toilets + Cockpit shower

Engine: YANMAR 4JH3E

HP / Cooling System: 55 HP

Yacht Electrical Equipment, Navigation Equipment & Additional Information

Batteries: 3 X 130 Ah for the service, single engine battery

Energy Recovery: :Solar Panels (2 X 100W) / Shore power and battery charger

Hot Water: Yes (from engine and 220V)

Pumps: Electric +manual

Windlass: Lofrans 1200 W

Depth Sounder: Raymarine ST60

Log (type): Raymarine ST60

Wind Indicator: Raymarine ST60

Autopilot: Raymarine ST 6001

GPS: GPS (GARMIN 126)+ GARMIN Plotter (GPS map298) at steering position

Communication: VHF ( Raymarine- GMDSS)

Steering:Wheel

Refrigerators: Electric

Cooking Appliances: Gas Stove-Oven

Bimini top

Sprayhood

Swimming ladder

Swimming platform covered in teak

Gangway

EPIRB

LED Lights

Gangway

Complete safety equipment for 8 persons

Rigging, Sails and Winches

Aluminium mast

Aluminium boom

2 Spreaders

Furling Main Sail (2015)

Furling Genoa (2016)

2012 Fixed Boom vang

Spinnaker boom

1 x Electric Lewmar 48

1x Lewmar 48 Winche

2x Lewmar 40 winches

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

This Beneteau Oceanis 423 Clipper has been viewed 79 times

Broker/Dealer Information

North Star Marine Brokers

Mr Ioannis Zenzefilis
Lavrio Technological & Cultural Park
Lavrion
Attica
19500
Greece
Please mention that you saw this boat on TheYachtMarket.
XXXX XXX XXX

Thank You

Your message has been sent.

Change units of measure

This feature requires cookies to be enabled on your browser.

Show price in:
Show lengths, beam and draft in:
Show displacement or weight in:
Show capacity or volume in:
Show speed in:
Show distance in:

Ask for more photos

Email to a friend

Report this boat

Thank you, your message has been sent

Why not register your interest in these similar boats?

We will send the following details to the sellers of the selected boats: Your name, email address, phone number (if provided). your country and which boat(s) you are interested in.