General InformationChange
unit of measurement >
|
Make/model
|
Corby 25 Ep
|
|
Year of manufacture
|
2010
|
|
Length overall
|
7.62 metres
|
|
Length waterline
|
6.71 metres
|
|
Beam
|
2.44 metres
|
|
Draft
|
1.52 metres
|
|
Displacement
|
2,100 kg
|
|
Hull
|
0
|
|
Location
|
Pwllheli North Wales, United Kingdom
|
Propulsion
|
Engine
|
1 x Lombardini 13Hp twin cylinder
|
|
Fuel
|
Diesel
|
Description
Corby 25 Ep
Accommodation :
6 berths in 2 cabins
Inventory :
Mechanical :
To achieve the ultimate performance, a stiffer, lighter Hull & Deck is laminated with FRP in Epoxy resin. In order to reduce pitching movement, the weight has been kept to a minimum in both the fore & aft hull sections. The deck, ringframes & stringers have been constructed with sandwiched closed cell foam. The rudderstock & tiller has been constructed ultilizing Carbon fibre with a composite rudderblade. She has been post cured @ over 50 degrees C for 14 hours to increase stiffness by 20%. The topsides are Snow White with Misty Grey decks and waterline stripes, all professionally sprayed using 545 epoxy primer, undercoat then durable G-Line paint all from AWLGRIP. Lightweight Lombardini 13Hp twin cylinder diesel The lightweight Lombardini 13Hp twin cylinder diesel is installed on a saildrive with folding propeller. A few key advantages with the Lombardini Marine 502M power units are: Total package weight, including saildrive - only 108kgs. The hydrodynamic design of the saildrive leg makes it the most slender production saildrive on the market. Exhaust emission well below EEC requirements Fuel capacity: 25.00 litres Maximum speed: 6.00 knots Cruising speed: 5.00 knots Range: 111 kilometres A set of performance race spec One Sails (McWilliams) will be available at £5000+Vat : 1x Carbon Mainsail 1x Carbon Genoa 1x Dacron Jib 1x AP spinnaker Licrospar (Italy) double spreader 11/12ths alloy mast- narrower than Z-Spar section (less windage upwind) Selden Carbon spinnacker pole Dyform forestay BSI Chrome bronze rigging screws Spectra backstay directly spliced into KARVER eyes (no shackles) VECTRAN jib halyard Dyneema Main halyard Quality LEWMAR winches. Composite Rudder, carbon stock & tiller. SPINLOCK clutches and tiller extension. HARKEN deckgear. Fine tune on mainsheet All dyneema control lines 316 / A4 Stainless steel pulpit, pushpits, stancions & guardwires Bulkhead compass. 12v battery & switch Plastimo manual bilge pump
This Corby 25 Ep has been viewed 3336 times