General InformationChange
unit of measurement >
|
Make/model
|
Feltz 45ft Steel Cutter
|
|
Name of boat
|
45ft Steel Cutter
|
|
Year of manufacture
|
1997
|
|
Length overall
|
13.90 metres
|
|
Beam
|
4.10 metres
|
|
Draft
|
1.80 metres
|
|
Displacement
|
22,000 kg
|
|
Hull
|
Steel
|
|
Location
|
Lefkas, Greece
|
Propulsion
|
Engine
|
Perkins 60hp
|
|
Fuel
|
diesel
|
|
Fuel capacity
|
650 litres
|
Accommodation
|
Number of cabins
|
3
|
|
Number of berths
|
5
|
Well made olive ash interior, some laminate but many parts solid.
Floor is 2.5mm laminate of ash with teak stripes.
2 berth forecabin
I berth in the saloon
Large double aft cabin with small table and seat.
Galley equipped with stainless steel sink with pressurized hot and cold water, Taylor kerosene oven & fridge.
Full size chart table
Spacious heads with marine toilet and sink
Storage area with work bench
|
Description
Feltz 45ft Steel Cutter
This tough ocean cruiser has been extremely well built and finished both inside and out. She is fully equipped for blue water sailing and has been maintained with no expense spared by the current owner.
IBA Brokerage offers the details of this listed vessel in good faith. Whilst every effort is made to ensure accuracy of information, we cannot guarantee or warrant the accuracy of the information nor warrant the condition of the vessel. The buyer, whether himself or through his agent or his surveyor, should conduct such investigation, independent confirmation and additional due diligence as the buyer deems necessary.
All vessels are offered subject to prior sale, price change, or withdrawal without notice
Construction, Sail & Rig
Construction:
Steel, owner built to very high specifications and additional steel inner structure for strength.
4.5 tons lead keel sealed with inox plate.
All inox through hull fittings
At the construction stage the hull was fully treated to prevent corrosion (more details available on request). Hence there is no rust throughout the boat & hull.
7 anodes plus anode on the prop shaft
Sail & Rig
10mm forestay with Profurl roller reef
10mm shrouds & 8mm backstays
Starboard backstay is insulated and used as an aerial for SSB radio transmitter.
1 x mainsail 38m2 fair condition
1 x genoa 36 m2 good condition
2 x staysails 15m2 & 20m2 very good condition
1 x stormjib 10m2 excellent condition never used
1 x trysail excellent condition never used
2 tradewind sails 44m2 good condition
1 x blister 90m2 good condition
Sail cover
On Board Instruments & Electrical Equipment
On Board Instruments:
Shipmate VHF Fluxgate compass
Raymarine depthsound and speedometer Raytheon R40 Radar
Garmin 120 GPS Garmin 128 GPS (cockpit)
Robertson Hydraulic Autopilot Forward looking echo sounder
SSB Icom PCR1000 Icom IC-706 transmitter
Handheld VHF
Electrical Equipment:
3 x 180 amp + 1 x engine starter battery
Air Marine wind generator (plus spare)
Sterling shore power regulator (2005) 50 amps
Sterling alternator regulator
All electrical cables wider than necessary & in insulating pipes
800 watt inverter
220 volt shore power
General Equipment
Safety Equipment:
BFA Pacific Plus 6 person Liferaft Flares
Combined lifejackets and harnesses Fire extinguishers
ACR 406 EPIRB Throwline & light
General Equipment & Inventory
Lofrans ‘Falcon’ 1500W Windlass with bow, cockpit & remote control
45kg inox Bugel with 100m chain on bow
15kg Danforth with 20m chain & 100m line on stern
Simpson & Lawrence ‘Seatiger’ Manual stern windlass
Inflatable Achilles tender with 3.3hp outboard
Safe & Alarm system
Specialist tool kit for engine
Whale gusher manual bilge pump in cockpit
Electric bilge pump
Further pump to engine which can be switched to pump fore or aft of boat (270 litres per minute)
Luff Barograph
CD changer & radio
Royal Double wind steering system
Fenders, mooring warps & 2x Panama lines
Plus much much more
This Feltz 45ft Steel Cutter has been viewed 10640 times